The page only knew its own input. A build called f4hwn.fusion.bin reports EGZUMER+F4HWN v6.0.0.CN, and with the multi-system release a committed external slot makes the factory bootloader reflash the internal flash from that slot on every power-on -- so the uploaded image never runs and the page keeps naming it. The firmware prints its own banner on USART1; tools/uvk5_banner.py reads it back, /api/firmware returns running: {banner, matches_uploaded, note}, and the page shows what the device reports, flagging it only when the running version is not in the uploaded image at all.
That reader also exposed a regression of my own: _start_stderr_pump had been rewritten to read the pipe in 64 KB chunks, which kept QEMU from blocking but delivered nothing to the log until 64 KB had accumulated -- and the banner is forty bytes, so it never appeared. It reads lines again, still starting before anything waits on QEMU, and test_uvk5_supervisor passes either way.
The screenshot example pasted one build's numbers and told the reader to get them with nm -- which cannot work here, because the images are program-header-only ELFs with no symbol table. It now asks the firmware through tools/uvk5_buffers.py first. The webui example drops the flags entirely, since the page draws the controller's memory and needs none.
Also fixed the paragraph in both READMEs that had a tool name and a flag on one line, which the doc checker (correctly) read as passing that flag to that tool.
The flags are optional now and the page needs no addresses at all, so the examples no longer paste one build's numbers: screenshot.py is shown asking the firmware through tools/uvk5_buffers.py, and the webui example omits them entirely. The paragraph that said they default to one known build is replaced with what actually happens.
The page was told --frame-addr 0x200012BE --status-addr 0x2000163E and used them as a fallback. The firmware the user actually flashed keeps its buffers at 0x2000129E/0x2000161E, 32 bytes earlier, so every line landed 32 bytes off: that is the "other firmware looks shifted" report. The images here are minimal ELFs with no symbol table, so there is nothing to read -- but the firmware's own buffers hold the same bytes the controller holds, and tools/uvk5_buffers.py finds them by matching (1024/1024 bytes for that file).
The two address flags are optional now, work/run-webui.ps1 passes no machine-specific values at all, and the page reports what it found in /api/status and /api/panel. tools/uvk5_testenv.qemu() also looks in the sibling qemu-7.2/build the rest of the repo assumes. Fixed /api/panel's emulator-off branch, which called jsonify with both a dict and kwargs and 500'd.
Tests: test_uvk5_buffers (the search must count matches, not pairs -- its first version scored every offset full marks and always answered the first one).
uvk5_stream.py used STATUS_BYTES without importing it, so the panel branch raised NameError on every frame and a bare except swallowed it: every screen the page drew came from guest RAM at one build's addresses. The pump now reports which source it used and why, webui exposes it (/api/panel and frame_source), and test_uvk5_stream asserts the panel wins when reachable and that a fallback is announced.
The ST7565 column counter wrapped at 128 instead of the controller's 132, so addresses 128..131 came back as 0..3, fell outside the col>=4 store, and were dropped: every row lost its last four pixels, which is where the battery icon lives. Pre-fix, filling a page with 0xFF left columns 124..127 blank; now they carry content and the page's frame matches the panel memory 8192/8192.
UVK5_BK4819_PROBE reassembles the sixteen bits a read clocks out and logs them against the register's own value: 1566 of 1566 agree on the working model. That agreement is not proof -- removing the skip_falling fix, which is exactly the historical left-shift regression, leaves the reassembled word unchanged, so this observation point is not the one the guest samples at. tools/test_bk4819_readback.sh therefore stays the guard.
tools/test_bk4819_readback.py is the working draft of a portable replacement (no source patch, no rebuild, no ARM gdb) and is deliberately NOT registered in run_tests.sh, so a proven guard is not swapped for an unproven one. Both the file and the two READMEs say so.
QMP takes a single client and the web UI holds it for its whole lifetime, so this is the normal outcome while the page is open rather than a broken emulator. Verified against a private instance: 128x64, 1819 pixels lit, 64 rows of ASCII.
tools/panel_dump.py prints the display controller's own memory as ASCII or PNG for any firmware, with the four mappings, so two builds can be compared instead of glanced at. The panel model gained a bounded UVK5_PANEL_PROBE diagnostic along the way.
Measured: the 5.9.0.CN panel agrees with its own framebuffer 8188 of 8192 pixels with the data untouched, and the fetched 6.0.0 build renders identically. Both program the same geometry registers, which is why the mapping is a driver convention and cannot be derived from the controller: it has to be measured.
Noted, not yet fixed: the display start line (0x40|n) is ignored, and the model stores pixels at col-4 with the column counter wrapping at 128 instead of the controller's 132 columns.
The probe scripts, run.sh, trace_run.sh, webui.py and two emulator tests each named the same hardcoded firmware from a source tree that is not in this repository. They now resolve QEMU and the firmware the way tools/uvk5_testenv.py does -- environment, then PATH, then whatever the checkout has -- and skip with a reason when there is nothing.
webui.py's --qemu and --elf lost their author defaults too: a bare qemu-system-arm through PATH, and no firmware until one is uploaded, which the page already reports.
tools/run_tests.sh defaults QEMU_SRC to a sibling of the checkout, which is where setup_qemu.sh puts it; the two defaults disagreed, so a fresh clone rebuilt nothing and reported a build that was not there. The interpreter list was also reading an empty $PY.
tools/test_bk4819_readback.sh was the last test with the author's paths, and the only one that could not run elsewhere. It now takes QEMU, GDB and ELF from the environment or PATH like the python tests, skips with a reason when one is missing, and says so on a platform whose QEMU cannot make the unix socket it uses.
tools/check_docs.py points UVK5_FW_DIR at a sibling and skips the file:line checks, with a message, when there is no firmware tree -- a fresh clone used to see thirteen failures it could do nothing about.
Added .github/workflows/unit.yml (the fast half of run_tests.sh on every push and PR), requirements-dev.txt for the one pip dependency, and a Dockerfile. Flask is not always installed, so test_webui now skips through setUpModule rather than erroring.
The bootloader's DFU handler is reachable only when SRAM[0x20000020] is 3, which only a program that then resets can write. The application's 0x05DD takes that path only with ENABLE_OVERLAY; this build resets straight back into the application instead. Ruled out by measurement: PTT alone, PTT+SIDE1/SIDE2, MENU, a host byte in the boot window including 0x0530, and 0x05DD.
boot-key now reads a + separated list, because the firmware's own BOOT_GetMode() needs PTT and a matrix key together for every special boot mode. Tested against all four documented combinations.
flash controller: store ACR/OPTKEYR instead of swallowing them, which is what stopped the factory bootloader from starting
slots over the firmware's own serial protocol (0x0720 family); uvk5_socket/uvk5_testenv so a fresh checkout skips instead of failing; web UI slot table and Multiboot button; quick start, CONTRIBUTING, and stop tracking firmware images and radio dumps
mckero