Updated Programming with CHIRP (markdown)

Programming-with-CHIRP.md

@@ -40,6 +40,9 @@ Because `Fusion` uses a different memory layout, another driver can read or writ
 
 1. Open `CHIRP`.
 1. If `File > Load Module...` is not available, enable CHIRP developer features first, then restart `CHIRP`.
+
+<img width="406" height="307" alt="Capture d’écran 2026-04-06 à 18 41 46" src="https://github.com/user-attachments/assets/7a82cd02-5368-4b08-ac15-3f0ee210bc75" />
+
 1. Use `File > Load Module...` and select the `f4hwn.fusion.chirp...py` file included with the firmware release.
 1. Once the module is loaded, `CHIRP` should offer the `UV-K1 & UV-K5 V3 (F4HWN Fusion)` model entry.
 
@@ -54,6 +57,8 @@ Because `Fusion` uses a different memory layout, another driver can read or writ
 1. Select `Model`: `UV-K1 & UV-K5 V3 (F4HWN Fusion)`.
 1. Start the download and wait until the radio image has been fully read.
 
+<img width="512" height="380" alt="Capture d’écran 2026-04-06 à 18 42 37" src="https://github.com/user-attachments/assets/b035c8d9-071f-4030-9adc-4966e1c30b29" />
+
 > [!TIP]
 > If communication fails, disconnect the cable, turn the radio on first, then reconnect the cable. The dedicated driver warns that some setups may fail if the radio was powered on with the cable already attached.
 
@@ -61,6 +66,8 @@ Because `Fusion` uses a different memory layout, another driver can read or writ
 
 After the download, enable `View > Show Extra Fields` in `CHIRP`.
 
+<img width="258" height="224" alt="Capture d’écran 2026-04-06 à 18 42 06" src="https://github.com/user-attachments/assets/ff30ffd3-2119-42ed-84f3-e69b14903315" />
+
 This is important because the dedicated `Fusion` driver exposes several channel-specific fields through the `Extra` group. Without `Show Extra Fields`, some firmware-specific parameters remain hidden in the channel editor.
 
 Typical examples include: