On a device the first frame of the match page only contains the station
cards and the time-range card, which can be shorter than the viewport —
scrollToItem(1) then has no scroll range and silently does nothing, and
by the time the async query results grow the list past one screen the
one-shot flag is already consumed. Retry every 100ms (up to 2s) until
firstVisibleItemIndex reaches the time-range card. Verified with a new
Robolectric test that grows the content after a delay. Bump 12.6.
Temporary Log.d probes at prefill, list-layout gate, scroll effect entry,
scrollToItem outcome and consume, to locate why the map Match prefill
scroll does not land on the device (Robolectric covers it). Bump 12.5.
Run the scroll tests at 411x891dp portrait (device-like layout) and add
a NavDisplay entryProvider scenario that composes MutualScreen the way
the app does, so the prefill scroll is exercised end-to-end.
On a device the Mutual entry is composed inside the NavDisplay transition;
LaunchedEffect could run before the LazyColumn is measurable and the
scrollToItem then never lands, leaving the page at the top. Only scroll
once onGloballyPositioned confirms the list has actually been laid out.
The grid-QSO dialog Match button now adds Mutual on top of the Map entry
instead of clearing the stack, so the system back gesture pops back to
the map page (the page the user came from). Bottom-nav tab switches keep
their replace semantics.
MutualMatchPrefillScrollTest verifies the map grid-QSO Match prefill:
time-range card lands at the top after scrollToItem, default open stays
at station inputs, and the query auto-starts with grid+24h pre-filled.
Adds Robolectric + compose ui-test-junit4 to the mutual test classpath.
Compose ui 1.11.x (BOM 2026.06.01) ignores the LazyListState
firstVisibleItemIndex constructor parameter - the list always starts at
item 0. Restore the scrollToItem approach (verified effective by
Robolectric Compose UI tests) and keep the auto-started query.
- Match prefill now positions the LazyColumn via its initial state
(queryMutualPasses(initialScrollIndex = 1)) instead of a post-layout
scrollToItem, so the page reliably opens with the time-range card at the
top while the 24h query runs.
- The install-time what's new dialog text now scrolls inside a bounded box
(max 360dp) instead of overflowing the fixed dialog frame.
- Grid-QSO dialog gains a Match action (radio-tower icon + label) in its
header; tapping it navigates to the match page pre-filled with the tapped
grid as the opposite station and a 24h time range, auto-starts the query,
and scrolls the page straight to the time-range card.
- Every grid is now tappable (previously only worked grids opened the
dialog); unworked grids show an empty QSO list instead of a hint.
The 11.2 gate only relaxed the pre-return zoom check, but the showLabels
gate below it still required LABEL_ZOOM_SUB (6.5), so first-call labels
stayed hidden in the 6.0..6.5 band where the 4-char grid lines render.
- Gate showLabels on GRID_ZOOM_SUB (6.0) when showFirstCallLabels is on.
- Relax MIN_LABEL_CELL_PX (48) to 0.6x for first-call mode so 1° cells
(~45 px on the equator at zoom 6.0) are not filtered out.
Normal grid-code labels are unchanged (still LABEL_ZOOM_SUB).
- pass_whatsnew_message rewritten as a single line with escaped \n bullets:
real newlines in the value are invalid for aapt2 ('not a valid string').
- Escape the apostrophe in "map's"; mark grid_qso_calls_count
formatted=false (two %d + '·' triggered multiple-substitutions).
- values-si: remove stray comma after map_altitude </string>.
All were latent resource errors surfaced by the forced recompile.
- Pass history (Iu-yang1 fork): PassesSettings.hoursBefore look-back window;
second 'Time before' slider in the pass filter; completed passes stay
listed (progress clamped to [0,1]) in the history window.
- Compass calibration (Iu-yang1 fork): OtherSettings.compassOffsetDegrees,
CompassAccuracy from the magnetic sensor, calibration dialog with
figure-eight accuracy meter, corrected heading and manual offset field;
RadarViewModel applies the offset.
- What's New dialog now shows the cumulative 4.4.6->4.4.7 changelog and
follows the system language (values/ + values-zh/).
- pass_filter_history_hours localized in es/ru/si/tr/uk.
Move the first-call label gate from LABEL_ZOOM_SUB (6.5) to GRID_ZOOM_SUB
(6.0): worked (green) cells are labelled with their first callsign as soon
as the 4-char grid lines render, not only at the name-label zoom.
Add a 'first call' pill toggle below the grid-mode switch (map top-right,
visible only in grid mode + VUCC award). When on, worked (green) cells are
labelled with the first callsign worked in that grid (earliest confirmed
QSO by time) instead of the Maidenhead code; non-worked cells get no label
at all. Persisted via OtherSettings.stateOfMapFirstCall (full MVI chain).
The feature is VUCC-only: All and other award overlays never draw it.
Day-cell numbers now count the most recent consecutive reports sharing the
newest status (counting back from the newest report, stopping at the first
different status), instead of the total report count of the day. Empty gaps
do not break the streak; statuses compare by exact report text; counting
does not cross day boundaries.
- SatDay gains streakCount (computed in AmSatRepository.buildStatuses)
- DayCell renders day.streakCount instead of slot count sum
- Add real org.json to core:data unit tests (android.jar stub cannot parse)
- Add 2 streak tests: mixed-status slot breaks, all-same-status counts all
The satellite search only matched exact continuous substrings, so names with
dashes, spaces or brackets (AO-7, ISS (ZARYA), FO-29) could not be found by
queries without those separators. Now the query is normalized (lowercased,
non-alphanumeric separators stripped) and split into space-separated tokens,
and every token must appear in the normalized satellite name. This makes
'ao7' match 'AO-7 (AMSAT-OSCAR 7)' and 'iss zarya' match 'ISS (ZARYA)'.
Numeric queries still match catnum exactly. Covered by 8 new unit tests.
The mutual pass list LazyColumn reset to the top on every return to the page.
Scroll position is now stored in the Activity-scoped MutualViewModel and
restored on re-entry; a new query (queryGeneration bump) rebuilds the list at
the top so stale positions never leak into fresh results.
The osmdroid map was recreated on every return to the Map page, resetting
center/zoom to the default and forcing grid mode back onto the station grid.
Now the viewport (center + zoom) is saved in the Activity-scoped
MapFilterViewModel only in grid mode and restored on re-entry, so the user
keeps exactly where they left off. Satellite mode keeps its original
follow-the-satellite behavior; cold-start entries and in-page grid toggles
still center on the station grid as before.
The award chip (VUCC/DXCC/WAJA/...) now lives in an Activity-scoped
MapFilterViewModel instead of a per-composition remember, so switching
to another page and back keeps the last selection; it resets to VUCC
only once per process (cold start). Removes the effect that forced
VUCC on every grid-mode entry.
The stored sync cursor was 'yyyyMMdd', which LoTW's qso_qslsince silently
ignores (measured live: it falls back to the system-supplied default).
Write a full UTC 'yyyy-MM-dd HH:mm:ss' cursor instead — the documented
format LoTW honors — so incremental pulls are exact (second precision)
and the settings page can show the last successful sync time on the LoTW
card, formatted like the ephemeris update time (prefs_updated_title).
Legacy yyyyMMdd cursors are normalized for the API, the gate and the
display (lotwCursorApi/lotwCursorDate/lotwCursorEpochMs).
Mirrors the ephemeris auto-update check: on every app start, if LoTW
credentials are configured, the new 'auto-sync LoTW grids' toggle is on,
at least one manual sync was done before, and today has not synced yet
(ARRL rate limit, ~once a day), pull confirmations since the last sync
and merge them. Same callsign -> incremental merge; callsign change ->
full replace. Manual dialog and automatic path share the orchestration
(mode resolution, gate, merge/persist) moved to core:domain
LoTWGridSync.kt; LoTWSyncMode moved to core:domain. 8 unit tests.
- Cancel: the dialog's cancel/back while syncing now aborts the download job
(cooperative cancellation in the stream reader, CancellationException
propagated, nothing written to storage). An accidental full sync can be
stopped immediately.
- Progress: the size estimate is conservative (900 B/record vs measured 720)
so the bar never hits 100% before the download truly ends; storage writes
moved to the IO dispatcher (multi-MB per-grid QSO JSON used to freeze the
main thread after download); when the bar caps, the UI switches to
'Processing downloaded data…' instead of looking stuck.
- Removed the outdated '3-10 seconds' hint (misleading for large accounts).
Stripe spacing now scales as 44px * 2^(zoom-7) instead of a fixed 44px on
screen: at the map's max zoom (7.0) the stripes keep the established look,
and at lower zooms they shrink with the map, so stripes stay pinned to the
map (same stripes-per-cell at every level) — denser on screen when zoomed
out, sparser when zoomed in.
- SharedDialog title gets start padding when only a cancel button is shown
(was flush against it); dialogs with both buttons unchanged.
- LoTW dialog: full-sync button bottom-left, incremental-merge bottom-right
(SpaceBetween instead of side-by-side).
- Pass card header: radar icon button enlarged to 48dp touch target with a
24dp icon, spanning both header rows vertically (name/time + elevations);
the pass info column narrows so the Opposite elevation shifts left.
- RadarDestination no longer auto-returns instantly when the mutual pass has
already ended — the auto-return now only runs while the pass is actually in
progress. Previously the collapsed-card radar shortcut appeared broken
('flash back to Mutual') whenever the computed pass had finished.
- Fakes: add the 4 last-sync bookkeeping members missed by the LoTW commit.
Icon-only radar button at the right end of the collapsed pass header (always
visible, not only when expanded); the pass info shifts left. The button's tap
is consumed and does not toggle the card expansion.
Two explicit sync buttons in the LoTW dialog:
- Full sync: qso_qslsince=2000-01-01, fresh report replaces all stored data.
- Incremental merge: since=last successful sync date, merged into the stored
set (grids union, QSOs deduped by call + time). First sync / callsign change
automatically falls back to full replace so no stale grids from another
account linger.
Progress & estimates:
- Report body is now streamed; the header's <APP_LoTW_NUMREC> gives the real
QSL count, total size is estimated as NUMREC * 720 B (measured), and the UI
shows a determinate bar with 'N QSOs, ~X s remaining' once known.
- Pre-sync hint shows the measured rate (~8 s per 100 QSOs).
- readTimeout raised to 600 s (stall timeout, not a total cap — huge accounts
legitimately take 30+ min at ARRL's ~10 KB/s stream rate); connectTimeout
raised to 60 s (a busy server took 36.5 s to accept a connection).
Also: ISettingsRepo gains last-sync date/callsign bookkeeping, and the mutual
test fake implements the new members.
DayCell displayed the count of the newest non-gray slot only; it now sums the
counts of all 12 slots of the day. The tile color still reflects the newest
reported status.
Grid mode is toggled from the map page pill (MapAction.ToggleGridMode writes
stateOfMapGrid); the settings-page switch was a duplicate entry point. Removes
the SwitchRow, the ToggleMapGrid action and its ViewModel branch, and trims
the OtherCard height by one row.
The expanded option rows used fillMaxWidth inside a full-screen Box, which
stretched the selector's dark surface across the whole map. The Column now
sizes to its widest child (IntrinsicSize.Max) so the box is just wide enough
for the label, count and expand arrow.
atsunatsu