From 18f393b6bbce5806b40be6b32cef4474a7c3a670 Mon Sep 17 00:00:00 2001 From: Armel FAUVEAU Date: Sun, 5 Apr 2026 17:30:23 +0200 Subject: [PATCH] Fix tab --- Button-functions.md | 4 +--- Menu.md | 24 ++++++++++++++---------- 2 files changed, 15 insertions(+), 13 deletions(-) diff --git a/Button-functions.md b/Button-functions.md index c13df52..4a80b5c 100644 --- a/Button-functions.md +++ b/Button-functions.md @@ -134,9 +134,7 @@ Available functions: * PTT - switch PTT mode CLASSIC / ONEPUSH * WIDE NARROW - switch between WIDE and NARROW * MUTE - mutes speaker volume -* RxA - switch the RX audio profile for the current modulation - * in `FM`: [FLAT / CLEAN / MID / BOOST / MAX] - * in `AM`: [SHARP / STOCK / OPEN] +* RxA - switch the RX audio profile for the current modulation: in `FM`, `FLAT` / `CLEAN` / `MID` / `BOOST` / `MAX`; in `AM`, `SHARP` / `STOCK` / `OPEN` * POWER HIGH - switch to the maximum power of `5 W` * REMOVE OFFSET - remove the offset of a memory channel, if present diff --git a/Menu.md b/Menu.md index 23c9cd8..e1d44c5 100644 --- a/Menu.md +++ b/Menu.md @@ -128,16 +128,20 @@ The number in front of each menu item description is the **_menu item number_** * CLASSIC (larger font, less information shown) * TINY (smaller font, more information shown) 1. `SetRxA` – sets the RX audio profile for the current modulation - * In `FM`, the available profiles are: - * `FLAT`: Lowest output gain (BK4829-safe). Most neutral, best for quiet environments. - * `CLEAN`: Default balanced profile. Comfortable audio with moderate gain. - * `MID`: Higher gain than CLEAN without the aggressiveness of BOOST. - * `BOOST`: Voice-forward profile for weak signals / noisy environments. Higher gain, more “present” audio. - * `MAX`: Maximum output gain (may distort on strong signals or small speakers). Best suited for an external speaker. - * In `AM`, the available profiles are: - * `SHARP`: narrow IF filter with low gain. More selective, with better adjacent-channel rejection. It can sound harsher or a bit distorted on strong signals, but it stays clear. - * `STOCK`: intended to stay as close as possible to the stock firmware behavior. - * `OPEN`: wider IF filter with higher gain. More open and pleasant on weak signals, but some receptions can sound a bit muffled, especially ATC. + + `FM` profiles: + + - `FLAT`: Lowest output gain (BK4829-safe). Most neutral, best for quiet environments. + - `CLEAN`: Default balanced profile. Comfortable audio with moderate gain. + - `MID`: Higher gain than CLEAN without the aggressiveness of BOOST. + - `BOOST`: Voice-forward profile for weak signals / noisy environments. Higher gain, more "present" audio. + - `MAX`: Maximum output gain (may distort on strong signals or small speakers). Best suited for an external speaker. + + `AM` profiles: + + - `SHARP`: Narrow IF filter with low gain. More selective, with better adjacent-channel rejection. It can sound harsher or a bit distorted on strong signals, but it stays clear. + - `STOCK`: Intended to stay as close as possible to the stock firmware behavior. + - `OPEN`: Wider IF filter with higher gain. More open and pleasant on weak signals, but some receptions can sound a bit muffled, especially ATC. 1. `SetTmr` - sets whether RX and TX timers are displayed 1. `SetOff` - sets the delay before the transceiver goes into deep sleep (OFF or 1 minute to 2 hours) 1. `SetNFM` - sets Narrow FM to Narrow or Narrower