mckero/uv-k1-k5v3-firmware-custom
1
0 Fork 0
mirror of https://github.com/armel/uv-k1-k5v3-firmware-custom.git synced 2026-10-02 03:15:37 +00:00
Code Issues Packages Projects Releases Wiki Activity
Files
6ae360d0296d70cab9c3a7ae73afc516d85775b8
uv-k1-k5v3-firmware-custom/App/app/chFrScanner.c
T

714 lines
21 KiB
C
Raw Blame History

#include "app/app.h"
#include "app/chFrScanner.h"
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
#include "driver/systick.h"
#endif
#include "functions.h"
#include "misc.h"
#include "settings.h"
//#include "debugging.h"
int8_t gScanStateDir;
bool gScanKeepResult;
bool gScanPauseMode;
#ifdef ENABLE_SCAN_RANGES
uint32_t gScanRangeStart;
uint32_t gScanRangeStop;
#endif
typedef enum {
SCAN_NEXT_CHAN_SCANLIST1 = 0,
SCAN_NEXT_CHAN_SCANLIST2,
SCAN_NEXT_CHAN_DUAL_WATCH,
SCAN_NEXT_CHAN_MR,
SCAN_NEXT_NUM
} scan_next_chan_t;
scan_next_chan_t currentScanList;
uint32_t initialFrqOrChan;
uint8_t initialCROSS_BAND_RX_TX;
#ifndef ENABLE_FEAT_F4HWN
uint32_t lastFoundFrqOrChan;
#else
uint32_t lastFoundFrqOrChan;
uint32_t lastFoundFrqOrChanOld;
#endif
static void NextFreqChannel(void);
static void NextMemChannel(void);
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
#define SCAN_FAST_PRECHECK_STEPS 6
#define SCAN_FAST_RSSI_MARGIN 16
#define SCAN_FAST_SQUELCH_MARGIN 8
#define SCAN_FAST_FINE_STEP_LIMIT 250
#define SCAN_FAST_FINE_REFINE_SPAN 1000
#define SCAN_FAST_FINE_REFINE_MAX 80
#define SCAN_FAST_FINE_RSSI_DROP 8
#define SCAN_FAST_RSSI_MAX 65535u
// Settle loop guard: at most this many 1us waits while the BK4819 glitch
// indicator stays above SCAN_FAST_GLITCH_THRESHOLD. Caps the worst-case
// settling time per step at ~50us before we read the RSSI anyway.
#define SCAN_FAST_GLITCH_GUARD_MAX 50
#define SCAN_FAST_GLITCH_THRESHOLD 200
// HF/VHF boundary in Hz: BK4819_PickRXFilterPathBasedOnFrequency() switches
// the front-end filter path here, so we only re-run that (relatively
// expensive) call when we actually cross the boundary.
#define SCAN_FAST_HF_VHF_BOUNDARY_HZ 28000000u
typedef enum {
SCAN_FAST_DISABLED,
SCAN_FAST_QUIET_BATCH,
SCAN_FAST_CANDIDATE
} scan_fast_result_t;
static uint16_t scanFastReg30;
static uint16_t scanFastNoiseFloor = SCAN_FAST_RSSI_MAX;
static uint32_t scanFastPrevFrequency;
static bool scanFastLastFullTuneCandidate;
static void ScanFastResetState(void)
{
// Called on every scan (re)start, after a reception, and on each
// wraparound to the start of the channel list / range. The noise
// floor is re-warmed up from current conditions instead of carrying
// stale calibration into a later sweep.
scanFastNoiseFloor = SCAN_FAST_RSSI_MAX;
scanFastPrevFrequency = 0;
scanFastLastFullTuneCandidate = false;
}
static uint16_t ScanFastReadRssi(void)
{
uint8_t guard = SCAN_FAST_GLITCH_GUARD_MAX;
while (guard-- && BK4819_GetGlitchIndicator() >= SCAN_FAST_GLITCH_THRESHOLD)
{
SYSTICK_DelayUs(1);
}
// Discard first read: after fast tuning the RSSI/AGC value may still be stale.
BK4819_GetRSSI();
return BK4819_GetRSSI();
}
static void ScanFastTune(uint32_t frequency)
{
if (scanFastPrevFrequency == 0 ||
((frequency < SCAN_FAST_HF_VHF_BOUNDARY_HZ) !=
(scanFastPrevFrequency < SCAN_FAST_HF_VHF_BOUNDARY_HZ)))
{
BK4819_PickRXFilterPathBasedOnFrequency(frequency);
}
scanFastPrevFrequency = frequency;
BK4819_SetFrequency(frequency);
BK4819_WriteRegister(BK4819_REG_30, 0);
BK4819_WriteRegister(BK4819_REG_30, scanFastReg30);
}
static bool ScanFastIsCandidate(uint16_t rssi)
{
if (scanFastNoiseFloor == SCAN_FAST_RSSI_MAX)
{
scanFastNoiseFloor = rssi;
return false;
}
const uint16_t noiseTrigger =
(scanFastNoiseFloor > SCAN_FAST_RSSI_MAX - SCAN_FAST_RSSI_MARGIN)
? SCAN_FAST_RSSI_MAX
: (uint16_t)(scanFastNoiseFloor + SCAN_FAST_RSSI_MARGIN);
const uint16_t squelchTrigger =
(gRxVfo->SquelchOpenRSSIThresh > SCAN_FAST_SQUELCH_MARGIN)
? (uint16_t)(gRxVfo->SquelchOpenRSSIThresh - SCAN_FAST_SQUELCH_MARGIN)
: 0;
if (rssi >= noiseTrigger && rssi >= squelchTrigger)
return true;
if (rssi < scanFastNoiseFloor)
scanFastNoiseFloor = rssi;
else
scanFastNoiseFloor = (uint16_t)((7u * scanFastNoiseFloor + rssi + 4u) >> 3);
return false;
}
#endif
#if defined(ENABLE_FEAT_F4HWN_SCAN_FASTER) && defined(ENABLE_SCAN_RANGES)
static void ScanRangeFastRefineCandidate(uint16_t firstRssi)
{
const uint16_t step = gRxVfo->StepFrequency;
if (step == 0 || step >= SCAN_FAST_FINE_STEP_LIMIT)
return;
uint16_t maxSteps = SCAN_FAST_FINE_REFINE_SPAN / step;
if (maxSteps == 0)
maxSteps = 1;
if (maxSteps > SCAN_FAST_FINE_REFINE_MAX)
maxSteps = SCAN_FAST_FINE_REFINE_MAX;
uint16_t bestRssi = firstRssi;
uint32_t bestFrequency = gRxVfo->freq_config_RX.Frequency;
uint8_t fallingSteps = 0;
for (uint16_t i = 0; i < maxSteps; ++i)
{
const uint32_t prevRxFrequency = gRxVfo->pRX->Frequency;
gRxVfo->freq_config_RX.Frequency =
APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, gScanRangeStart, gScanRangeStop);
RADIO_ApplyOffset(gRxVfo);
const uint32_t freq = gRxVfo->pRX->Frequency;
if ((gScanStateDir > 0 && freq < prevRxFrequency) ||
(gScanStateDir < 0 && freq > prevRxFrequency))
{
break;
}
ScanFastTune(freq);
const uint16_t rssi = ScanFastReadRssi();
if (rssi > bestRssi)
{
bestRssi = rssi;
bestFrequency = gRxVfo->freq_config_RX.Frequency;
fallingSteps = 0;
}
else if (bestRssi > rssi && bestRssi - rssi >= SCAN_FAST_FINE_RSSI_DROP)
{
if (++fallingSteps >= 3)
break;
}
}
gRxVfo->freq_config_RX.Frequency = bestFrequency;
RADIO_ApplyOffset(gRxVfo);
ScanFastTune(gRxVfo->pRX->Frequency);
}
static scan_fast_result_t ScanRangeFastPrecheck(void)
{
if (!gScanRangeStart)
return SCAN_FAST_DISABLED;
if (gRxVfo->SquelchOpenRSSIThresh == 0)
return SCAN_FAST_DISABLED;
// Mute AF DAC during the precheck sweep: avoids audio glitches and
// saves a few uA on each silent step. The bit is restored on the real
// tune by RADIO_SetupRegisters() in NextFreqChannel().
scanFastReg30 = BK4819_ReadRegister(BK4819_REG_30) & ~BK4819_REG_30_MASK_ENABLE_AF_DAC;
for (uint8_t i = 0; i < SCAN_FAST_PRECHECK_STEPS; ++i)
{
gRxVfo->freq_config_RX.Frequency =
APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, gScanRangeStart, gScanRangeStop);
RADIO_ApplyOffset(gRxVfo);
const uint32_t freq = gRxVfo->pRX->Frequency;
// Detect wraparound: scanning forward but the new freq is lower
// than the previous one (or scanning backward but it's higher)
// means the range has wrapped from stop back to start. Reset the
// noise floor so the new pass re-warms up from current conditions.
if (scanFastPrevFrequency != 0 &&
((gScanStateDir > 0 && freq < scanFastPrevFrequency) ||
(gScanStateDir < 0 && freq > scanFastPrevFrequency)))
{
ScanFastResetState();
}
ScanFastTune(freq);
const uint16_t rssi = ScanFastReadRssi();
if (ScanFastIsCandidate(rssi))
{
ScanRangeFastRefineCandidate(rssi);
return SCAN_FAST_CANDIDATE;
}
}
return SCAN_FAST_QUIET_BATCH;
}
#endif
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
static bool MemChannelFastPrecheck(uint16_t channel)
{
if (gRxVfo->SquelchOpenRSSIThresh == 0)
{
scanFastLastFullTuneCandidate = false;
return true;
}
const uint32_t frequency = SETTINGS_FetchChannelFrequency(channel);
if (frequency == 0 || frequency == 0xFFFFFFFF)
{
scanFastLastFullTuneCandidate = false;
return true;
}
// Mute AF DAC for the same reason as in ScanRangeFastPrecheck().
scanFastReg30 = BK4819_ReadRegister(BK4819_REG_30) & ~BK4819_REG_30_MASK_ENABLE_AF_DAC;
ScanFastTune(frequency);
if (ScanFastIsCandidate(ScanFastReadRssi()))
{
scanFastLastFullTuneCandidate = true;
return true; // signal detected: let the full tune path follow
}
// No signal here: still mirror the probed frequency in the VFO so the
// status line (channel name + frequency) keeps in sync as we skip.
// RADIO_ConfigureChannel() will overwrite these values cleanly when a
// candidate is eventually retained.
scanFastLastFullTuneCandidate = false;
gRxVfo->freq_config_RX.Frequency = frequency;
return false;
}
static void AdvanceMemScanList(const bool enabled)
{
if (enabled)
if (++currentScanList >= SCAN_NEXT_NUM)
currentScanList = SCAN_NEXT_CHAN_SCANLIST1;
}
static void SetMemScanProgressChannel(uint16_t channel)
{
gEeprom.MrChannel[ gEeprom.RX_VFO] = channel;
gEeprom.ScreenChannel[gEeprom.RX_VFO] = channel;
gRxVfo->CHANNEL_SAVE = channel;
}
#endif
#if defined(ENABLE_FEAT_F4HWN_RESUME_STATE) || defined(ENABLE_SCAN_RANGES)
void CHFRSCANNER_ScanRange(void) {
gScanRangeStart = gScanRangeStart ? 0 : gTxVfo->pRX->Frequency;
gScanRangeStop = gEeprom.VfoInfo[!gEeprom.TX_VFO].freq_config_RX.Frequency;
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
ScanFastResetState();
#endif
if(gScanRangeStart > gScanRangeStop)
SWAP(gScanRangeStart, gScanRangeStop);
}
#endif
void CHFRSCANNER_Start(const bool storeBackupSettings, const int8_t scan_direction)
{
if (storeBackupSettings) {
initialCROSS_BAND_RX_TX = gEeprom.CROSS_BAND_RX_TX;
gEeprom.CROSS_BAND_RX_TX = CROSS_BAND_OFF;
gScanKeepResult = false;
}
RADIO_SelectVfos();
gNextMrChannel = gRxVfo->CHANNEL_SAVE;
currentScanList = SCAN_NEXT_CHAN_SCANLIST1;
gScanStateDir = scan_direction;
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
ScanFastResetState();
#endif
if (IS_MR_CHANNEL(gNextMrChannel))
{
if(!RADIO_CheckValidList(gEeprom.SCAN_LIST_DEFAULT)) {
RADIO_NextValidList(1);
}
// channel mode
if (storeBackupSettings) {
initialFrqOrChan = gRxVfo->CHANNEL_SAVE;
lastFoundFrqOrChan = initialFrqOrChan;
}
NextMemChannel();
}
else
{ // frequency mode
if (storeBackupSettings) {
initialFrqOrChan = gRxVfo->freq_config_RX.Frequency;
lastFoundFrqOrChan = initialFrqOrChan;
}
NextFreqChannel();
}
#ifdef ENABLE_FEAT_F4HWN
lastFoundFrqOrChanOld = lastFoundFrqOrChan;
#endif
gScanPauseDelayIn_10ms = scan_pause_delay_in_2_10ms;
gScheduleScanListen = false;
gRxReceptionMode = RX_MODE_NONE;
gScanPauseMode = false;
}
/*
void CHFRSCANNER_ContinueScanning(void)
{
if (IS_FREQ_CHANNEL(gNextMrChannel))
{
if (gCurrentFunction == FUNCTION_INCOMING)
APP_StartListening(gMonitor ? FUNCTION_MONITOR : FUNCTION_RECEIVE);
else
NextFreqChannel(); // switch to next frequency
}
else
{
if (gCurrentCodeType == CODE_TYPE_OFF && gCurrentFunction == FUNCTION_INCOMING)
APP_StartListening(gMonitor ? FUNCTION_MONITOR : FUNCTION_RECEIVE);
else
NextMemChannel(); // switch to next channel
}
gScanPauseMode = false;
gRxReceptionMode = RX_MODE_NONE;
gScheduleScanListen = false;
}
*/
void CHFRSCANNER_ContinueScanning(void)
{
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
if (scanFastLastFullTuneCandidate &&
gCurrentFunction != FUNCTION_INCOMING &&
!g_SquelchLost)
{
ScanFastResetState();
}
#endif
if (gCurrentFunction == FUNCTION_INCOMING &&
(IS_FREQ_CHANNEL(gNextMrChannel) || gCurrentCodeType == CODE_TYPE_OFF))
{
APP_StartListening(gMonitor ? FUNCTION_MONITOR : FUNCTION_RECEIVE);
}
else
{
IS_FREQ_CHANNEL(gNextMrChannel) ? NextFreqChannel() : NextMemChannel();
}
gScanPauseMode = false;
gRxReceptionMode = RX_MODE_NONE;
gScheduleScanListen = false;
}
void CHFRSCANNER_Found(void)
{
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
// After a real reception the BK4819 AGC has shifted, biasing the next
// few RSSI readings high. Reset the precheck state so it warms up from
// the current noise floor instead of carrying stale calibration into
// the post-reception scan, which otherwise turns nearly every channel
// into a CANDIDATE and erases the speed gain.
ScanFastResetState();
#endif
if (gEeprom.SCAN_RESUME_MODE > 80) {
if (!gScanPauseMode) {
gScanPauseDelayIn_10ms = scan_pause_delay_in_5_10ms * (gEeprom.SCAN_RESUME_MODE - 80) * 5;
gScanPauseMode = true;
}
} else {
gScanPauseDelayIn_10ms = 0;
}
// gScheduleScanListen is always false...
gScheduleScanListen = false;
/*
if(gEeprom.SCAN_RESUME_MODE > 1 && gEeprom.SCAN_RESUME_MODE < 26)
{
if (!gScanPauseMode)
{
gScanPauseDelayIn_10ms = scan_pause_delay_in_5_10ms * (gEeprom.SCAN_RESUME_MODE - 1) * 5;
gScheduleScanListen = false;
gScanPauseMode = true;
}
}
else
{
gScanPauseDelayIn_10ms = 0;
gScheduleScanListen = false;
}
*/
/*
switch (gEeprom.SCAN_RESUME_MODE)
{
case SCAN_RESUME_TO:
if (!gScanPauseMode)
{
gScanPauseDelayIn_10ms = scan_pause_delay_in_1_10ms;
gScheduleScanListen = false;
gScanPauseMode = true;
}
break;
case SCAN_RESUME_CO:
case SCAN_RESUME_SE:
gScanPauseDelayIn_10ms = 0;
gScheduleScanListen = false;
break;
}
*/
#ifdef ENABLE_FEAT_F4HWN
lastFoundFrqOrChanOld = lastFoundFrqOrChan;
#endif
if (IS_MR_CHANNEL(gRxVfo->CHANNEL_SAVE)) { //memory scan
lastFoundFrqOrChan = gRxVfo->CHANNEL_SAVE;
}
else { // frequency scan
lastFoundFrqOrChan = gRxVfo->freq_config_RX.Frequency;
}
gScanKeepResult = true;
}
void CHFRSCANNER_Stop(void)
{
if(initialCROSS_BAND_RX_TX != CROSS_BAND_OFF) {
gEeprom.CROSS_BAND_RX_TX = initialCROSS_BAND_RX_TX;
initialCROSS_BAND_RX_TX = CROSS_BAND_OFF;
}
gScanStateDir = SCAN_OFF;
const uint32_t chFr = gScanKeepResult ? lastFoundFrqOrChan : initialFrqOrChan;
const bool channelChanged = chFr != initialFrqOrChan;
if (IS_MR_CHANNEL(gNextMrChannel)) {
gEeprom.MrChannel[gEeprom.RX_VFO] = chFr;
gEeprom.ScreenChannel[gEeprom.RX_VFO] = chFr;
RADIO_ConfigureChannel(gEeprom.RX_VFO, VFO_CONFIGURE_RELOAD);
if(channelChanged) {
SETTINGS_SaveVfoIndices();
gUpdateStatus = true;
}
}
else {
gRxVfo->freq_config_RX.Frequency = chFr;
RADIO_ApplyOffset(gRxVfo);
RADIO_ConfigureSquelchAndOutputPower(gRxVfo);
if(channelChanged) {
SETTINGS_SaveChannel(gRxVfo->CHANNEL_SAVE, gEeprom.RX_VFO, gRxVfo, 1);
}
}
#ifdef ENABLE_FEAT_F4HWN_RESUME_STATE
gEeprom.CURRENT_STATE = 0;
SETTINGS_WriteCurrentState();
#endif
RADIO_SetupRegisters(true);
gUpdateDisplay = true;
}
static void NextFreqChannel(void)
{
#ifdef ENABLE_SCAN_RANGES
if(gScanRangeStart) {
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
const scan_fast_result_t fastResult = ScanRangeFastPrecheck();
if (fastResult == SCAN_FAST_QUIET_BATCH)
{
scanFastLastFullTuneCandidate = false;
gScanPauseDelayIn_10ms = 1;
gUpdateDisplay = true;
return;
}
if (fastResult == SCAN_FAST_DISABLED)
{
scanFastLastFullTuneCandidate = false;
gRxVfo->freq_config_RX.Frequency = APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, gScanRangeStart, gScanRangeStop);
}
else
{
scanFastLastFullTuneCandidate = true;
}
#else
gRxVfo->freq_config_RX.Frequency = APP_SetFreqByStepAndLimits(gRxVfo, gScanStateDir, gScanRangeStart, gScanRangeStop);
#endif
}
else
#endif
{
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
scanFastLastFullTuneCandidate = false;
#endif
gRxVfo->freq_config_RX.Frequency = APP_SetFrequencyByStep(gRxVfo, gScanStateDir);
}
RADIO_ApplyOffset(gRxVfo);
RADIO_ConfigureSquelchAndOutputPower(gRxVfo);
RADIO_SetupRegisters(true);
#ifdef ENABLE_FASTER_CHANNEL_SCAN
gScanPauseDelayIn_10ms = 9; // 90ms
#else
gScanPauseDelayIn_10ms = scan_pause_delay_in_6_10ms;
#endif
gUpdateDisplay = true;
}
static void NextMemChannel(void)
{
static uint16_t prev_mr_chan = 0;
const bool enabled = (gEeprom.SCAN_LIST_DEFAULT > 0 && gEeprom.SCAN_LIST_DEFAULT <= MR_CHANNELS_LIST + 1) ? gEeprom.SCAN_LIST_ENABLED : true;
const int16_t chan1 = (gEeprom.SCAN_LIST_DEFAULT > 0 && gEeprom.SCAN_LIST_DEFAULT <= MR_CHANNELS_LIST + 1 && gEeprom.SCANLIST_PRIORITY_CH[0] != MR_CHANNELS_MAX) ? gEeprom.SCANLIST_PRIORITY_CH[0] : -1;
const int16_t chan2 = (gEeprom.SCAN_LIST_DEFAULT > 0 && gEeprom.SCAN_LIST_DEFAULT <= MR_CHANNELS_LIST + 1 && gEeprom.SCANLIST_PRIORITY_CH[1] != MR_CHANNELS_MAX) ? gEeprom.SCANLIST_PRIORITY_CH[1] : -1;
const uint16_t prev_chan = gNextMrChannel;
uint16_t chan = 0;
//char str[64] = "";
if (enabled)
{
switch (currentScanList)
{
case SCAN_NEXT_CHAN_SCANLIST1:
prev_mr_chan = gNextMrChannel;
//sprintf(str, "-> Chan1 %d\n", chan1 + 1);
//LogUart(str);
if (chan1 >= 0)
{
if (RADIO_CheckValidChannel(chan1, false, gEeprom.SCAN_LIST_DEFAULT))
{
currentScanList = SCAN_NEXT_CHAN_SCANLIST1;
gNextMrChannel = chan1;
break;
}
}
[[fallthrough]];
case SCAN_NEXT_CHAN_SCANLIST2:
//sprintf(str, "-> Chan2 %d\n", chan2 + 1);
//LogUart(str);
if (chan2 >= 0)
{
if (RADIO_CheckValidChannel(chan2, false, gEeprom.SCAN_LIST_DEFAULT))
{
currentScanList = SCAN_NEXT_CHAN_SCANLIST2;
gNextMrChannel = chan2;
break;
}
}
[[fallthrough]];
/*
case SCAN_NEXT_CHAN_SCANLIST3:
if (chan3 >= 0)
{
if (RADIO_CheckValidChannel(chan3, false, 0))
{
currentScanList = SCAN_NEXT_CHAN_SCANLIST3;
gNextMrChannel = chan3;
break;
}
}
[[fallthrough]];
*/
// this bit doesn't yet work if the other VFO is a frequency
case SCAN_NEXT_CHAN_DUAL_WATCH:
// dual watch is enabled - include the other VFO in the scan
// if (gEeprom.DUAL_WATCH != DUAL_WATCH_OFF)
// {
// chan = (gEeprom.RX_VFO + 1) & 1u;
// chan = gEeprom.ScreenChannel[chan];
// if (IS_MR_CHANNEL(chan))
// {
// currentScanList = SCAN_NEXT_CHAN_DUAL_WATCH;
// gNextMrChannel = chan;
// break;
// }
// }
default:
case SCAN_NEXT_CHAN_MR:
currentScanList = SCAN_NEXT_CHAN_MR;
gNextMrChannel = prev_mr_chan;
chan = 0xFFFF;
break;
}
}
if (!enabled || chan == 0xFFFF)
{
chan = RADIO_FindNextChannel(gNextMrChannel + gScanStateDir, gScanStateDir, true, gEeprom.SCAN_LIST_DEFAULT);
if (chan == 0xFFFF)
{ // no valid channel found -> wrapping back to the first channel
chan = MR_CHANNEL_FIRST;
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
// Wraparound: re-warm the precheck noise floor on the new pass
// so it tracks current RF conditions instead of an EMA that
// accumulated drift over the previous full sweep.
ScanFastResetState();
#endif
}
gNextMrChannel = chan;
//sprintf(str, "----> Chan %d\n", chan + 1);
//LogUart(str);
}
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
SetMemScanProgressChannel(gNextMrChannel);
if (!MemChannelFastPrecheck(gNextMrChannel))
{
gScanPauseDelayIn_10ms = 1;
gUpdateDisplay = true;
AdvanceMemScanList(enabled);
return;
}
#endif
if (gNextMrChannel != prev_chan
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
|| scanFastLastFullTuneCandidate
#endif
)
{
#ifndef ENABLE_FEAT_F4HWN_SCAN_FASTER
gEeprom.MrChannel[ gEeprom.RX_VFO] = gNextMrChannel;
gEeprom.ScreenChannel[gEeprom.RX_VFO] = gNextMrChannel;
#endif
RADIO_ConfigureChannel(gEeprom.RX_VFO, VFO_CONFIGURE_RELOAD);
RADIO_SetupRegisters(true);
gUpdateDisplay = true;
}
#ifdef ENABLE_FASTER_CHANNEL_SCAN
gScanPauseDelayIn_10ms = 9; // 90ms .. <= ~60ms it misses signals (squelch response and/or PLL lock time) ?
#else
gScanPauseDelayIn_10ms = scan_pause_delay_in_3_10ms;
#endif
#ifdef ENABLE_FEAT_F4HWN_SCAN_FASTER
AdvanceMemScanList(enabled);
#else
if (enabled)
if (++currentScanList >= SCAN_NEXT_NUM)
currentScanList = SCAN_NEXT_CHAN_SCANLIST1; // back round we go
#endif
}
Reference in new issue View Git Blame Copy Permalink