Many fix and prepare new release

CMakePresets.json

@@ -70,7 +70,7 @@
                 "ENABLE_NAVIG_LEFT_RIGHT": true,
                 "ENABLE_SWD": false,
                 "VERSION_STRING_1": "v0.22",
-                "VERSION_STRING_2": "v4.3.1"
+                "VERSION_STRING_2": "v4.3.2"
             }
         },
         {

README.md

@@ -342,11 +342,11 @@ Click `Restore Calibration Data` and wait until the process fully completes.
 Many thanks to various people:
 
 * [Muzkr](https://github.com/muzkr)
+* [Andrej](https://github.com/Tunas1337)
 * [Egzumer](https://github.com/egzumer)
 * [OneOfEleven](https://github.com/OneOfEleven)
 * [DualTachyon](https://github.com/DualTachyon)
 * [Mikhail](https://github.com/fagci)
-* [Andrej](https://github.com/Tunas1337)
 * [Manuel](https://github.com/manujedi)
 * @wagner
 * @Lohtse Shar

tools/unbrick_k5_v1/README.md

@@ -114,6 +114,15 @@ If no errors appear, the bootloader has been successfully restored.
 
 The device should now start correctly on DFU mode again. You can then flash stock firmware, or the [F4HWN firmware for UV-K5 V1](https://github.com/armel/uv-k5-firmware-custom) (not the Fusion 🔥 Edition).
 
+# Helpful Videos
+
+Here are two videos that can assist you during the unbricking process. If you’re new to ST-LINK, OpenOCD, or SWD debugging, these will give you a clear visual overview:
+
+- [Your UV-K5 V1 is bricked? 🫣 Here’s how to fix it 😌](https://www.youtube.com/watch?v=4cWtYH_bpro) by F4HWN
+- [UNBRICK - Process Windows Quansheng UV-K5 , K6](https://www.youtube.com/watch?v=EmF08o5MIE0) by M0FXB
+
+These resources are not mandatory, but they can make the procedure much easier to follow.
+
 # Disclaimer
 
 This procedure requires opening the device and directly manipulating its microcontroller over SWD. Incorrect use may permanently damage the radio. Proceed at your own risk.