Friend's device (system language Bahasa Indonesia) fell back to
English even though values-in exists. Modern Android devices report
the Indonesian locale as "id" (ISO-639-1 current code; "in" is the
legacy alias) and resource matching is strict. Added values-id as a
copy of values-in in core/presentation and feature/cw (both language
directories ship the same translations).
Verified: check_strings OK (9 files incl. values-id);
:app:compileDebugKotlin BUILD SUCCESSFUL. Not released (batch with
pending fixes).
Official code issues found during review (user-reported):
1. GPS "success" was shown instantly even when no fix was obtained:
- setStationPosition() always returned true (permissions exception
swallowed, async requestLocationUpdates without waiting)
- now: suspend + LocationManagerCompat.getCurrentLocation (GPS
first, network fallback), permission check upfront, 15s timeout,
success only when onLocationChanged fires; SettingsRepo takes
Context for the permission check; ViewModel waits for the real
result and shows "Unable to get location - check permission and
GPS/network signal" on failure (4 locales)
2. Data update faked success on total failure:
- updateFromRemote now counts successful sources; 0 success throws
IOException -> timestamp NOT refreshed, Toast "Update failed -
check your network" (4 locales, new IShowToast resId overload)
- OkHttp timeouts widened: connect 15s / read 20s / write 20s
Verified: check_strings OK; all modules compile.
Release intentionally NOT triggered (user: fix everything first, then
one release).
User-test fixes (3rd overwrite, version stays 4.5.2/452):
1. Log page was invisible everywhere outside the radar tab:
- allNavItems in MainScreen.kt was missing Screen.WavelogLog ->
not in bottom nav, not in More menu
- SettingsScreen UI-order lists were missing the WavelogLog row ->
not in page order settings either
Now the Log page appears in the More menu (default sub menu tail,
migration appends it) AND in UI settings page-order lists.
2. Frequency display: formatFrequency was MHz.kHz.Hz (145.900.000);
now MHz.kHz (145.900) per request. Applies to transceiver panel
and Log page alike (shared formatter).
3. Log tab frequency: now extracts the exact numbers shown in the
transceiver panel (txBaseFrequencyHz for TX, uplinkLow/uplinkHigh
range for linear) - no re-computation, no extra decimals. Upload
uses the same tuned frequency (Hz precision kept internally).
4. Log page (More menu) table: date+time column (MM-dd HH:mm),
row separators (table lines), uploaded checkmark kept.
Verified: check_strings OK (8 files); :app:compileDebugKotlin
BUILD SUCCESSFUL (includes upstream merge 1a552417).
Background: user's WaveLog server has NO v2 API (all /api/v2/* return
404; /api/qso v1 works - verified with curl). First fix only tried v2
paths, so uploads still failed with 404. Also: Log tab frequencies did
not match the Doppler panel, linear transponders showed a single
frequency instead of the passband range, and errors were toast-only
(no copy).
Changes:
- WaveLogApi: full v1 support with auto fallback
- v2 first (Bearer header + JSON fields), on 404 fall back to v1
(key inside JSON body + ADIF string) - both with and without
index.php prefix
- test connection: v2 GET api/v2/token -> v1 POST
api/get_contacts_adif (validates key + station id)
- station gridsquare is v2-only; on v1 the uploader falls back to
the user's QTH grid (grid check skipped/equal)
- v1 ADIF: call/band=SAT/mode/freq+freq_rx (MHz)/qso_date/time_on
(UTC, compact)/gridsquare(4)/sat_name/prop_mode=SAT, byte-length
field prefixes
- 409 duplicate counts as success in both versions
- Error dialog with copy: test/upload failures now open an AlertDialog
with the full error (incl. actual URL + HTTP code), Copy button
(ClipboardManager) and Cancel; uploader collects the first failure
message
- Log tab frequency sync: LogTab receives txBaseFrequencyHz from the
radar page (the tuned frequency shown in the transceiver panel);
RX is computed through the same Doppler mapping as the Doppler
panel; linear transponders show the full uplink/downlink range
(Doppler-corrected low-high) instead of a single frequency
- Restored uploadWavelogQueue (lost in an earlier patch)
Verified: check_strings.py OK (8 files, 452/4.5.2);
:app:compileDebugKotlin BUILD SUCCESSFUL.
Background: user tested 4.5.2 and reported 4 issues. Same-version
overwrite per user (4.5.2 exists solely for the logbook system).
Fixes:
1. Upload 404 — root cause: user server URL ending in /index.php was
concatenated again (/index.php/index.php/api/v2/...) -> 404. Now:
- normalizeUrl strips trailing /index.php
- every request tries the index.php path first, falls back to the
rewritten path on 404
- 409 conflict (duplicate QSO) counts as success (moves out of queue)
- failure messages include the actual URL + HTTP code for debugging
2. Swipe-to-delete was dead: rowWidth was never measured (0) so the
75% threshold was 0 and the drag was clamped to 0. Now measured via
onSizeChanged + smooth spring/tween snap-back animation.
3. Transponder picker: long card list replaced with an
ExposedDropdownMenuBox dropdown (scrollable menu, pick one).
4. New Log page under the More menu: table view (time / frequency /
satellite / callsign / uploaded checkmark). WavelogQso gains
uploaded flag; uploader marks instead of removing; queue keeps
uploaded entries (500 cap). Old persisted subMenuOrder gets
WavelogLog appended (migration).
Verified: check_strings.py OK (8 files, 452/4.5.2);
:app:compileDebugKotlin BUILD SUCCESSFUL.
Background: satellite operators want to log QSOs during a pass while
watching live frequencies. 4.5.2 adds WaveLog (logbook server) API v2
integration: log from the radar page, upload to a self-hosted WaveLog
instance with grid-mismatch protection.
Changes:
- Radar page: new third tab "Log" between Transceivers and SSTV
- pick a transponder, watch live TX/RX Doppler-corrected frequencies
- enter callsign, Enter stores locally (UTC time + that second's
frequencies sampled together)
- local entry list shows time/frequency/callsign only (no upload
status, per user: proves the entry was saved)
- swipe-to-delete: yellow trash while swiping, turns into Undo at
75%, 5s countdown before auto-delete (custom gesture, no
SwipeToDismissBox)
- Settings: new WaveLog card (server URL / API key / station ID /
auto-upload switch / test connection / upload now buttons) matching
the user's reference screenshot layout
- Upload pipeline: POST /index.php/api/v2/qso with required fields
(station_profile_id, call, band=SAT, mode, qso_date, time_on UTC)
plus freq/freq_rx (Hz), gridsquare (from station profile via
GET /api/v2/station/{id}), sat_name; RST omitted per user
- Grid check: station gridsquare (first 4) vs user QTH (first 4);
mismatch shows a confirm dialog (ignore & upload / cancel)
- Auto upload: 10-minute in-app retry loop (only when switch on);
manual upload button; local queue capped at 500, all entries stored
locally regardless of switch
- Fixed: subMenuOrder was never persisted (4.5.1 regression)
- core/domain: compileOnly org.json (runtime uses Android's)
- Version 4.5.2 (452)
Verified: check_strings.py OK (8 files, 452/4.5.2);
:app:compileDebugKotlin BUILD SUCCESSFUL locally.
Background: 8 bottom-nav items squeeze long English labels on narrow
screens. 4.5.1 introduces the 5+N pattern: 5 main tabs plus a fixed
6th "More" button that pops a second-level menu (spring bounce) with
the remaining pages.
Changes:
- MainScreen: nav split into main (<=5, screenOrder-driven) + more
(subMenuOrder); More button with popup panel + spring animation;
BackHandler closes the menu before navigating back
- MoreMenuPopup: bottom-end card, current page highlighted, scrim
click to dismiss
- UI Settings: page order card now has two zones (main menu, max 5,
Settings locked last with no drag handle / more menu); move buttons
between zones, drag-to-reorder within zones; new subMenuOrder pref
- Defaults: main = Satellites/Passes/Radar/Map/Settings,
more = Mutual/Roaming/CwDecode; old screenOrder migrates by
classifying pages against the default sub menu
- Hard-coded UI strings localized (Tracking/Lat/Lon/Qth/Connect/
Track/Stop/CW permission prompts) into EN/ZH/TR
- NEW Indonesian locale (values-in, 181 strings + cw module strings)
- user rule: every future release must update EN/ZH/TR/IN
- Version 4.5.1 (451)
Verified: check_strings.py OK (8 files, no bare apostrophes);
:app:compileDebugKotlin BUILD SUCCESSFUL locally.
Background: the transponder panel CW decoder (added by the upstream
fork author) used a lightweight Kotlin Bayesian engine (core/domain/cw,
kept untouched as a fallback). This change makes the panel use the
Morse Expert engine ported in 4.5.0, so both CW entry points share the
same decoder with a live waterfall.
Changes:
- New mini layout cw_panel_main.xml (waterfall 80dp + decoded text,
status line hidden but ID kept for controller lookup)
- MainActivity.onCreate overload with applyImmersive flag; panel binds
with false so the host window system bars are not touched
- CwDecoderPanel now embeds the mini layout via AndroidView and drives
the MainActivity controller: start/stop/reset map to the engine,
lifecycle follows panel expand (start) / collapse (release mic)
- radar module now depends on feature:cw (+ constraintlayout 2.2.1,
same as cw) for layout + controller reuse
- What's new rewritten in EN/TR/ZH for this release only
Verified: :feature:radar:compileDebugKotlin and :app:compileDebugKotlin
BUILD SUCCESSFUL locally; check_strings.py OK (7 files, no bare
apostrophes).
- versionCode 449 -> 450, versionName 4.4.9 -> 4.5.0
- pass_whatsnew_message rewritten (en/zh/tr) to describe ONLY this
release: new CW Decoder page (live Morse decoding + waterfall) and
its settings (message type, font size, 9 color themes)
Verified: check_strings.py OK (no bare apostrophes).
Compose integration of the ported CW decoder engine:
- CwDecodeScreen: AndroidView embedding the ported activity_main.xml,
lifecycle delegated to the ported MainActivity controller (onCreate ->
onResume, onDispose -> onPause/onDestroy), RECORD_AUDIO runtime
permission flow (with permanent-denial -> app settings), original
options_menu actions as a top button row (pause/clear/save/record/
settings), double-back-to-exit preserved
- CwSettingsDialog: message_type (general_text/ham_radio_qso),
text_font_size (7-99), and the 9 color keys (bg_color/text_color/...)
reading/writing the same prefs keys as the original app
(getPackageName()+"_preferences"), colors sourced from I2.b tables
- Navigation: Screen.CwDecode ("CwDecode") placed between Roaming and
Map in the default order; defaultScreenOrder updated; ic_cw morse icon;
nav_cw strings (en/zh/tr); app depends on :feature:cw
Verified: :feature:cw:compileDebugKotlin + :app:compileDebugKotlin
BUILD SUCCESSFUL (first pass, no errors).
Two drag issues from user testing:
1. Only adjacent swaps worked - the drag gesture could not move an
item past multiple positions. Root cause: the pointerInput closure
kept the index captured at composition; after the live swap
(items.add(target, removeAt(index))) the closure's index was
stale, so subsequent targets were computed from the wrong origin
and the saved order got corrupted (also made previously moved
items snap back).
Fix: track the dragged item's live position via draggingIndex -
onDragStart resolves it with items.indexOf(screen), onDrag computes
the target from draggingIndex and updates it after each swap.
2. The six-dot grip icon was ugly; replaced with a single 8dp themed
dot (Box + CircleShape inside the 48dp touch area, onSurfaceVariant
color). ic_drag.xml removed.
What's-new rewritten in en/zh/tr with ONLY this release's changes
(user rule: replace, never append history). Version stays 4.4.9
(覆盖 per user). Verified: settings + app compile, check_strings.py
clean.
v4.4.9 page-order list crashed the Settings screen on scroll: the
drag-reorder LazyColumn sits inside the Settings LazyVerticalGrid
item, and a vertically scrollable child measured with infinite max
height throws IllegalStateException, killing the app before the UI
Settings card even renders.
Fix: give the LazyColumn a bounded height (itemHeight * items.size
= 7 rows × 48dp = 336dp). Drag logic, animation and persistence
unchanged.
What's-new rewritten in en/zh/tr with ONLY this fix (user rule:
replace, never append history). Version stays 4.4.9 (覆盖 per user).
Verified: settings + app compile; check_strings.py clean.
Users can now change the bottom navigation order (previously fixed):
- New "Page order" section under the Settings toggle in the UI
Settings card: vertical list of all 7 pages, each with a drag
handle (new ic_drag drawable, Material drag_indicator glyph) on
the right.
- Drag a handle up/down: the item follows the finger with live
swap + animateItem() placement animation; on release the order is
persisted (OtherSettings.screenOrder, comma-separated in prefs so
order survives; StringSet would not).
- "Reset order" button restores the default order
(Satellites/Passes/Radar/Mutual/Roaming/Map/Settings).
- MainScreen now sorts navItems by screenOrder (empty = default,
stable sort keeps the canonical order); hiddenScreens filtering
unchanged; Settings entry always visible.
- New strings prefs_ui_order_title / prefs_ui_order_reset in
en/zh/tr; What's-new updated in all three locales.
Version stays 4.4.9 (覆盖 per user). Verified: core:data tests
pass, settings + app compile.
Two changes per user request:
1. Data source toggles default OFF with legacy-URL migration
(continuation of the 4.4.8 fix, now also in the dialog): old
example.com placeholder URLs are replaced by the real defaults and
the custom toggles stay off, so the online update never points at a
dead source after upgrading.
2. New "UI Settings" card between Other Settings and Credits:
one switch per bottom-navigation page (卫星/过境/雷达/匹配/漫游/地图/设置
in fixed order). Turning a page off removes it from the nav bar and
the remaining items close up automatically; order is never
rearranged. The Settings entry is always visible (switch disabled)
so the user can never lose access to settings. Persisted via
OtherSettings.hiddenScreens (StringSet of Screen.screenId; screenId
added to the Screen sealed class - simpleName is unsafe under R8).
Version bump per fork convention: 4.4.8 -> 4.4.9, versionCode 449.
What's-new updated in en/zh/tr.
Verified: core:data + core:domain tests pass, all modules compile.
Old installs that once enabled the custom TLE/transceiver toggles kept
the legacy "https://example.com/tle.txt" placeholder in preferences.
Under the new "toggle replaces the online-update default source"
semantics this pointed the All/SatNOGS fetch at a dead URL and broke
satellite updates after upgrading to 4.4.8.
Migration in getDataSourcesSettings(): example.com placeholders are
replaced by the real default URLs (Celestrak All / SatNOGS) and the
toggles are forced OFF unless a non-default, real user URL is set.
Also disable the reset (loop) icon buttons while their toggle is off.
Verified: core:data tests pass, settings + app compile. Version stays
4.4.8 (覆盖 per user).
The "Custom URL" dialog's two URL fields now control the default
source used by the online update, per the user's intent (one-time
setup, no extra steps per update):
- Defaults are real URLs now: TLE = Celestrak "All" (active group
CSV), transceivers = SatNOGS API. The example.com placeholders are
gone.
- updateFromRemote(): the "All" TLE entry and the "SatNOGS" entry are
replaced by the user's URLs when the corresponding custom toggle is
ON and the URL is non-blank; otherwise the real defaults are used.
The old "Other" appended-source logic is removed - the toggle now
means "use my URL for this source" instead of "download an extra
source". Each source (TLE / transceivers) is independent.
- Each URL field gained a reset (loop) icon button on the right that
restores the default URL text (new ic_reset drawable, Autorenew
vector). Strings added in en/zh/tr.
Test updated: custom TLE URL data now lands under the "All" type
instead of "Other". Verified: core:data tests pass, settings + app
compile. Version stays 4.4.8 (覆盖 per user).
The online update always pulls every preset Celestrak/amsat URL and
the custom URL lived hidden behind the "Import" dialog's toggle. The
user wants a discoverable entry point to edit the custom source URLs.
Rename the data card button "Import" -> "Custom URL" (en: Custom URL,
zh: 自定义URL, tr: Özel URL). The existing dialog already hosts both
URL text fields (TLE + transceivers) and the file-import buttons, so
no dialog changes are needed - the import feature stays inside, as
the user requested.
Version bump per fork convention (feature change): 4.4.7 -> 4.4.8,
versionCode 447 -> 448. v4.4.7 release stays downloadable.
What's-new dialog updated in all three locales with this change.
Verified: settings + app compile, unit tests unaffected.
A bare apostrophe in "QTH定位器 2.0'dan" broke aapt resource
compilation (Invalid unicode escape sequence) and failed the release
build. Escape it as \' per Android string resource rules.
Three detail fixes plus branding, per user review:
1. Night mode visibility (roaming page): hardcoded reference blues
(#01DDFF/#0BACF1) collapse to black under the red ColorMatrix
filter (R channel only), making the page unreadable. Replace ALL
colors with MaterialTheme.colorScheme (background/surface/
surfaceVariant/onSurface/onSurfaceVariant/primary/error). GPS
status dots become themed circles (primary/error) so they survive
the red filter; red marker keeps the original pnt drawable.
2. Settings cards unclamped:
- OtherCard: fixed height(268.dp) squeezed the last toggle row
(spacing 42/42/42/15px on device); drop the fixed height.
- CardCredits: same 268dp + SpaceBetween overflowed, gluing the
last thanks entry to the warranty line; drop fixed height, use
spacedBy(8.dp) and insert 24dp before the warranty text.
3. Branding:
- Settings top title: "Look4Sat v%s" -> "Look4Sat Pro v%s" (en/tr);
title Text no longer marquees and wraps instead (heightIn(min=48)).
- APK asset name: look4sat-<ver>.apk -> Look4Sat-Pro-<ver>.apk.
- What's-new dialog (pass_whatsnew_message) rewritten in all three
locales (en/zh/tr) with this release's changes; zh gets its own
localized title "Look4Sat Pro 更新内容".
Verified: roaming/settings/passes/app compile, 11 unit tests pass.
Reverts the auto-update machinery after review — the page now simply mirrors the station position (站位) from the shared settingsRepo.stationPosition StateFlow, exactly what the Settings page shows:
- RoamingScreen: removed the LocationManager listeners, the 30s re-request loop, the provider filter and the location-disabled hint. No polling, no auto-updates; coordinates are whatever the station GPS says.
- Settings: removed the '漫游位置实时更新' toggle (stateOfRoamingLive, key, action, strings en/zh/tr) that caused the 'Other' card to overflow — the sixth unlabeled switch clipped past the card's rounded bottom edge was that row overflowing a fixed-height card. Card height back to 268.dp, five rows fit again.
Verified: core:domain tests, roaming/settings/app compile clean; zero references to RoamingLive remain.
Rework the Roaming page after user review. It is now a faithful port of the QTH定位器 location panel, not a loose re-skin:
UI (matching the reference layout):
- GPS status dot (real: green when a fresh fix exists, outline when stale/missing) + date + time header
- Lat/Lon rows with DMS and 5-decimal display, big 8-char locator centered below
- 3x3 grid of neighboring 4-char squares with the reference proportions: center column ~2.6x wider (21.4% : 56.2% : 21.4%) and center row the tallest (31.5% : 35.9% : 31.7%); red position marker now placed at the fractional position of the fix inside the center cell (was fixed center)
- No oversized GPS button: live updating is now a Settings toggle '漫游位置实时更新' (stateOfRoamingLive, default on) that drives periodic location refresh
Style & night-mode safety:
- All colors come from MaterialTheme.colorScheme (surfaceVariant/secondaryContainer/error) — no hardcoded cyan/blue from the original app. The red night filter (ColorMatrix keeping only the R channel) blanked the old hardcoded palette; theme colors survive it.
- Chinese nav label '漫游' added to values-zh (was missing, showing English 'Roaming')
Settings:
- OtherSettings.stateOfRoamingLive persisted (default true), toggle row in Other card, height adjusted
Verified: feature:roaming, feature:settings, app compile clean.
The settings outro title now reads 'BG7NTA & the original author would like to thank' (en) / 'BG7NTA 与原作者感谢' (zh) / 'BG7NTA ve orijinal yazar teşekkür eder' (tr), alongside the BA7OPF/BG7NTA entries added to the credits list.
Ports the QTH定位器 (com.us1pm.gridsquarelocator) location panel into Look4Sat as a new 'Roaming' page, restyled with the app's own look.
UI (top to bottom):
- Info header: GPS status dot, big 8-char locator, Lat/Lon rows with DMS + 5-decimal display, and a GPS 定位 button
- 3x3 grid panel: the current 4-char Maidenhead square (e.g. OL42) centered, surrounded by its 8 neighbors (OL33..OL51), with a red position marker in the center cell
Logic:
- QthConverter gains qthNeighbors(square) building the 3x3 grid with field/square carry at boundaries (AA00 wraps to RR99, IO91 crosses into J field), and qthToSquare(locator) extracting the 4-char square
- Verified against the decompiled app algorithm and the reference screenshot (OL42 grid matches exactly); 9 unit tests cover normal, boundary and field-wrap cases
Navigation:
- New bottom-nav item 'Roaming' between Match and Settings, with a crosshair icon
- New feature:roaming module (ViewModel + Compose screen) registered in the app
Build config:
- Lowered Gradle JVM heap from -Xmx6g to 768m: the 2GB build server froze on the old value; heavy release builds stay on GitHub Actions
With 5-decimal coordinates the Lat/Lon/Qth row overflowed, pushing the QTH value to a wrapped line. Split into two rows: Lat + Lon on the first line, Qth on the second.
Also append BA7OPF (pass matching feature) and BG7NTA to the credits list in en/zh/tr string resources.
App display name changed from Look4Sat to Look4Sat Pro (fork identity). Version follows upstream scheme without suffix: 4.4.3 -> 4.4.4, versionCode 443 -> 444.
Station lat/lon was stored rounded to 4 decimals (~11 m). Bump to 5 decimals (~1.1 m), slightly better than GPS hardware accuracy without showing noise.
- SettingsRepo.setStationPosition: round(4) -> round(5)
- QthConverter.qthToPosition: round(4) -> round(6) so 10-char locators fully roundtrip
- Update QthConverterTest expected values to 6-decimal precision
Port the 8-char (4-pair) Maidenhead grid algorithm from the
"QTH定位器 2.0" app (com.us1pm.gridsquarelocator) into QthConverter
so locator precision matches common grid tools instead of being
truncated to 6 chars.
Previously positionToQth() emitted only 6-char locators and
qthToPosition() discarded everything past the 6th character via
take(6), losing the finer 30" x 15" resolution carried by 8-char
grid squares.
What changed:
- positionToQth(lat, lon, precision = 8) now emits 8-char locators
by default; precision = 6 / 10 available for backwards
compatibility and maximum resolution (1.25" x 0.625").
- qthToPosition() parses 6/8/10-char locators and returns the center
of the finest encoded cell (30" x 15" for 8-char, 1.25" x 0.625"
for 10-char) instead of the 6-char cell center.
- Locator validation regex tightened: 6/8/10 chars accepted,
4-char strings like "JN58" are now rejected as invalid.
- Boundary clamping added so lat = 90 / lon = 180 no longer overflow
the A-R / 0-9 / a-x alphabet (previously produced invalid chars).
Also fixed a pre-existing compile error in RadarView.kt: a delegated
property was assigned after declaration ("by" on an already declared
val). Converted the sweep angle to an if/else expression.
Verification:
- QthConverterTest extended to 5 test cases covering 6/8/10-char
roundtrips, invalid input, boundary coordinates and roundtrip
stability.
- Cross-checked against a Python reference model of the decompiled
APK algorithm: 20k random roundtrips at 8 and 10 chars, 0 failures.
- :core:domain:test green; :app:compileDebugKotlin passes.
- MutualViewModel is Activity-scoped, so returning from Radar keeps query results
- TrackSampleData gains time field for live cut-off
- Removed standalone mutual card from radar page
- RadarViewCompose draws optional dashed station-B track + current dot
- RadarScreen builds trackB from mutual data up to current time
- MutualPass now carries TrackSample (azimuth/elevation for both stations)
- New MutualRadarView: polar plot with elevation rings (30/60/90),
cardinal spokes, solid A-track vs dashed B-track, AOS/LOS markers
- Shown in expanded mutual pass card and radar page mutual card
- Fix cubic Bezier control points (proper Catmull-Rom to Bezier conversion)
- Refine AOS/LOS more robustly by walking from edge into the pass window
- Still 5s sampling for smooth curves
Port satlover.de dual-station pass matching feature:
- New feature/mutual module with mutual pass data model
- MutualViewModel: compute overlapping passes for two stations
- ElevationCurveChart: Canvas-based dual elevation curve with drag
- MutualScreen: input form + results with expandable cards
- Navigation: add Mutual tab to bottom navigation bar
- i18n: add Chinese/English strings for new feature
Use MaterialTheme.colorScheme.primary for satellite name
text in all three lists (Components, SatellitesScreen,
PassesScreen), matching the color that was previously
used for the catalog number.
Remove the NORAD catalog number (e.g. '44444 - ') prefix
from satellite names in three places:
- Pass list items (Components.kt)
- Satellite selection list (SatellitesScreen.kt)
- Pass detail view (PassesScreen.kt)
The number is still accessible via satellite details if needed.
- Add newColumnCount tracking to CwSpectrogram
- CwDecoder now processes each new column individually for timing
- Each column = 8ms at 8000 Hz sample rate
- Proper per-column iteration through spectrogram history
Complete rewrite inspired by Morse Expert / CW Skimmer (VE3NEA):
- CwFFT: radix-2 FFT (256-point) for time-frequency analysis
- CwSpectrogram: sliding-window waterfall (40 cols x 33 bins, 8ms resolution)
- CwBayesianDecoder: Gaussian probability replaces hard dit/dash thresholds
- CwChannelTracker: multi-channel peak detection (up to 3 signals)
- CwDecoder: integrates all components, monitors 200-1200 Hz simultaneously
Key advantages over v2 (ggmorse):
- Frequency-agnostic: full spectrum monitored, not locked to one tone
- Multi-channel: tracks multiple signals in parallel
- Bayesian: probability-based decisions, not hard ratios
- Doppler tolerant: frequency drift just moves energy between bins
- After initial pitch lock, re-scan every ~8 seconds in a narrow
±100 Hz window around the current pitch estimate
- Only re-lock if pitch change > 20 Hz (avoids jitter)
- Helps maintain lock when Doppler tracking has residual error
- Add CwDsp with FIR bandpass filter, envelope detection, Goertzel tone detector
- Add CwDecoder with real-time Morse timing analysis and character lookup
- Add CW state/actions to RadarState, wire into RadarViewModel
- Add collapsible CW decoder panel to transceivers page
- 19 unit tests covering DSP, Morse table, and decoder state
- Shares IAudioCapture with SSTV, auto-stops SSTV when CW starts
- Add DopplerFrequencyCalculator utility with passband mapping + Doppler correction
- Add MHz input UI with real-time 1Hz refresh during pass
- Add kHz offset for downlink frequency correction
- TX/RX fields on same row for compact layout
- 40 unit tests covering linear/FM/inverted transponders
mckero
atsunatsu