Reworks the Roaming grid to structurally match the reference app instead of a card-style panel:
- Removed the outer ElevatedCard, rounded cells, cell gaps and inner padding: the 3x3 grid is now one continuous table that fills the panel, cells connected edge-to-edge.
- Cells separated by 2dp divider lines that run the full width/height of each row/column, crossing at right angles like a real coordinate grid (the reference app's continuous separator lines).
- Cells are square-cornered (no rounded corners), background fills each cell fully.
- Column widths 21.4% : 56.2% : 21.4%, row heights 31.5% : 35.9% : 31.7% retained.
- Center cell: OL42 is larger (28sp bold) and placed at upper-middle; the red marker sits BELOW the text with a 10dp gap, horizontally offset by the 3rd-pair fraction — never overlapping the label, matching the reference 'text above, marker below' layout.
- Surrounding labels bumped to 16sp Medium (larger/stronger than before).
- Info header also switched from an ElevatedCard to a flat continuous block so the page reads as one continuous surface, like the reference.
The grid proportions, locator algorithm, marker mapping and boundary logic were already faithful; this change makes the visual structure faithful too.
Reverts the auto-update machinery after review — the page now simply mirrors the station position (站位) from the shared settingsRepo.stationPosition StateFlow, exactly what the Settings page shows:
- RoamingScreen: removed the LocationManager listeners, the 30s re-request loop, the provider filter and the location-disabled hint. No polling, no auto-updates; coordinates are whatever the station GPS says.
- Settings: removed the '漫游位置实时更新' toggle (stateOfRoamingLive, key, action, strings en/zh/tr) that caused the 'Other' card to overflow — the sixth unlabeled switch clipped past the card's rounded bottom edge was that row overflowing a fixed-height card. Card height back to 268.dp, five rows fit again.
Verified: core:domain tests, roaming/settings/app compile clean; zero references to RoamingLive remain.
Completes the port of the QTH定位器 app's location logic (read from the decompiled MainActivity):
1. Live location updates: a LocationListener registers GPS+NETWORK providers (10s / 10m, matching the reference onResume) while the Roaming page is visible and removes itself on dispose. Every fix is pushed through settingsRepo.setStationPosition, so the shared stationPosition StateFlow updates the Settings page and the map in lockstep — the page now refreshes in real time instead of only showing stale cached coordinates.
2. Provider filtering: only gps/network fixes are accepted, mirroring the reference showLocation() guard that rejects passive fixes.
3. Location-disabled hint: when GPS is off or permission is missing, the header shows a tappable '定位未开启,点击前往系统设置' row that opens ACTION_LOCATION_SOURCE_SETTINGS — the port of the reference btnLocationSettings button. The GPS status dot now has three states: fresh fix (primary), provider on but stale (error), provider off (outline).
4. Periodic recovery: a 30s re-request loop (honoring the 漫游位置实时更新 toggle) re-arms the location request after the chip falls idle.
Not ported (conflict, deliberate): the reference app's Play-store ad banner, 'New! Grid Square with map' promo and GP_IN preferences — commercial advertising does not belong in a GPL satellite tracker.
Addresses three review findings:
1. Coordinates now come straight from settingsRepo.stationPosition in the screen (collectAsStateWithLifecycle) — the exact same StateFlow the Settings page shows. Previously a separate ViewModel re-derived them, and it could lag behind the Settings page (user: '设置页更新了站位但漫游页死活不更新'). With the shared source the two pages can never disagree. RoamingViewModel removed; state derivation moved to RoamingState.fromPosition().
2. Red marker placement ported faithfully from the QTH定位器 app: it is driven by the 3rd character pair of the 8-char locator (the 'ih' in OL42ih45), mapped to a 0..1 fraction (lon a=west..x=east, lat inverted a=south..x=north), then scaled to the actual center-cell size. The grid now uses the reference proportions (columns 21.4/56.2/21.4, rows 31.5/35.9/31.7) and fills the screen, so the marker lands accurately on any device.
3. Workflow now uploads a versioned APK (look4sat-<version>.apk instead of look4sat.apk).
Also: Settings 'Other' card rows got vertical spacing (Arrangement.spacedBy) so the new roaming toggle is not glued to the night-mode row.
Rework the Roaming page after user review. It is now a faithful port of the QTH定位器 location panel, not a loose re-skin:
UI (matching the reference layout):
- GPS status dot (real: green when a fresh fix exists, outline when stale/missing) + date + time header
- Lat/Lon rows with DMS and 5-decimal display, big 8-char locator centered below
- 3x3 grid of neighboring 4-char squares with the reference proportions: center column ~2.6x wider (21.4% : 56.2% : 21.4%) and center row the tallest (31.5% : 35.9% : 31.7%); red position marker now placed at the fractional position of the fix inside the center cell (was fixed center)
- No oversized GPS button: live updating is now a Settings toggle '漫游位置实时更新' (stateOfRoamingLive, default on) that drives periodic location refresh
Style & night-mode safety:
- All colors come from MaterialTheme.colorScheme (surfaceVariant/secondaryContainer/error) — no hardcoded cyan/blue from the original app. The red night filter (ColorMatrix keeping only the R channel) blanked the old hardcoded palette; theme colors survive it.
- Chinese nav label '漫游' added to values-zh (was missing, showing English 'Roaming')
Settings:
- OtherSettings.stateOfRoamingLive persisted (default true), toggle row in Other card, height adjusted
Verified: feature:roaming, feature:settings, app compile clean.
Include feature:roaming/build.gradle.kts (missed from the module commit) and keep the reduced Gradle heap (-Xmx768m) so local light builds don't freeze the 2GB server.
Ports the QTH定位器 (com.us1pm.gridsquarelocator) location panel into Look4Sat as a new 'Roaming' page, restyled with the app's own look.
UI (top to bottom):
- Info header: GPS status dot, big 8-char locator, Lat/Lon rows with DMS + 5-decimal display, and a GPS 定位 button
- 3x3 grid panel: the current 4-char Maidenhead square (e.g. OL42) centered, surrounded by its 8 neighbors (OL33..OL51), with a red position marker in the center cell
Logic:
- QthConverter gains qthNeighbors(square) building the 3x3 grid with field/square carry at boundaries (AA00 wraps to RR99, IO91 crosses into J field), and qthToSquare(locator) extracting the 4-char square
- Verified against the decompiled app algorithm and the reference screenshot (OL42 grid matches exactly); 9 unit tests cover normal, boundary and field-wrap cases
Navigation:
- New bottom-nav item 'Roaming' between Match and Settings, with a crosshair icon
- New feature:roaming module (ViewModel + Compose screen) registered in the app
Build config:
- Lowered Gradle JVM heap from -Xmx6g to 768m: the 2GB build server froze on the old value; heavy release builds stay on GitHub Actions
mckero