The import previously swallowed all exceptions silently. Now the upload
config dialog shows a specific message for: wrong password, expired
certificate, invalid file, and unknown failures.
- displayMode no longer trusts a stale submode for non-MFSK modes: FM/CW/SSB
records (including ones persisted with the old default submode=FT4) now show
their real mode; only MODE=MFSK uses the FT4 submode. QsoRecord defaults
changed mode=MFSK->FM, submode=FT4->''.
- LoTW report bridge sets submode=FT4 for MODE=MFSK so confirmations still
match local FT4 records.
- Logbook and LoTW upload config dialogs now use SharedDialog (bottom-sheet),
matching the LoTW confirmed-grids dialog style.
The Choose .p12 button was gated on a non-blank password, which forced users
to type the password before selecting the file. Now the file picker is always
available; after selection the filename is shown, then the password field and
an Import button appear.
- Port TQ8 signing/upload pipeline (core/data/lotw: LoTWConfig, LoTWKeyMaterial,
LoTWSigner, LoTWStorage, LoTWUploadRepository) with bundled ARRL config.tq6
- Multi-grid station locations: primary grid in GRIDSQUARE + full set in
MY_VUCC_GRIDS (unsigned tSTATION extra, IOTA precedent); signer matches
myGrid against the whole grid set
- Satellite-name normalization: SatNOGS names ("SO-50 (SaudiOSCAR 50)") resolve
to official LoTW names by exact-then-substring match
- Logbook storage: separate QsoDatabase (version 1, no migration on existing
installs), QsoRepository with dedupe/confirmation merge; LoTW sync (manual +
auto) feeds confirmations into the logbook and marks local uploads confirmed
- Radar Log tab: single-callsign recording, per-satellite mode preset
(CW/SSB/FT4), English social post generation (copy/share), LoTW upload with
one-shot preview confirmation + receipts ledger
- Settings: 日志本 section (records + confirmation state, delete on tap) above
LoTW config; LoTW upload config (TrustedQSL .p12 import + password, station
grid list incl. IOTA/CQZ/ITUZ)
- i18n strings (en/zh)
- Pass history (Iu-yang1 fork): PassesSettings.hoursBefore look-back window;
second 'Time before' slider in the pass filter; completed passes stay
listed (progress clamped to [0,1]) in the history window.
- Compass calibration (Iu-yang1 fork): OtherSettings.compassOffsetDegrees,
CompassAccuracy from the magnetic sensor, calibration dialog with
figure-eight accuracy meter, corrected heading and manual offset field;
RadarViewModel applies the offset.
- What's New dialog now shows the cumulative 4.4.6->4.4.7 changelog and
follows the system language (values/ + values-zh/).
- pass_filter_history_hours localized in es/ru/si/tr/uk.
The stored sync cursor was 'yyyyMMdd', which LoTW's qso_qslsince silently
ignores (measured live: it falls back to the system-supplied default).
Write a full UTC 'yyyy-MM-dd HH:mm:ss' cursor instead — the documented
format LoTW honors — so incremental pulls are exact (second precision)
and the settings page can show the last successful sync time on the LoTW
card, formatted like the ephemeris update time (prefs_updated_title).
Legacy yyyyMMdd cursors are normalized for the API, the gate and the
display (lotwCursorApi/lotwCursorDate/lotwCursorEpochMs).
Mirrors the ephemeris auto-update check: on every app start, if LoTW
credentials are configured, the new 'auto-sync LoTW grids' toggle is on,
at least one manual sync was done before, and today has not synced yet
(ARRL rate limit, ~once a day), pull confirmations since the last sync
and merge them. Same callsign -> incremental merge; callsign change ->
full replace. Manual dialog and automatic path share the orchestration
(mode resolution, gate, merge/persist) moved to core:domain
LoTWGridSync.kt; LoTWSyncMode moved to core:domain. 8 unit tests.
- Cancel: the dialog's cancel/back while syncing now aborts the download job
(cooperative cancellation in the stream reader, CancellationException
propagated, nothing written to storage). An accidental full sync can be
stopped immediately.
- Progress: the size estimate is conservative (900 B/record vs measured 720)
so the bar never hits 100% before the download truly ends; storage writes
moved to the IO dispatcher (multi-MB per-grid QSO JSON used to freeze the
main thread after download); when the bar caps, the UI switches to
'Processing downloaded data…' instead of looking stuck.
- Removed the outdated '3-10 seconds' hint (misleading for large accounts).
- SharedDialog title gets start padding when only a cancel button is shown
(was flush against it); dialogs with both buttons unchanged.
- LoTW dialog: full-sync button bottom-left, incremental-merge bottom-right
(SpaceBetween instead of side-by-side).
Two explicit sync buttons in the LoTW dialog:
- Full sync: qso_qslsince=2000-01-01, fresh report replaces all stored data.
- Incremental merge: since=last successful sync date, merged into the stored
set (grids union, QSOs deduped by call + time). First sync / callsign change
automatically falls back to full replace so no stale grids from another
account linger.
Progress & estimates:
- Report body is now streamed; the header's <APP_LoTW_NUMREC> gives the real
QSL count, total size is estimated as NUMREC * 720 B (measured), and the UI
shows a determinate bar with 'N QSOs, ~X s remaining' once known.
- Pre-sync hint shows the measured rate (~8 s per 100 QSOs).
- readTimeout raised to 600 s (stall timeout, not a total cap — huge accounts
legitimately take 30+ min at ARRL's ~10 KB/s stream rate); connectTimeout
raised to 60 s (a busy server took 36.5 s to accept a connection).
Also: ISettingsRepo gains last-sync date/callsign bookkeeping, and the mutual
test fake implements the new members.
Grid mode is toggled from the map page pill (MapAction.ToggleGridMode writes
stateOfMapGrid); the settings-page switch was a duplicate entry point. Removes
the SwitchRow, the ToggleMapGrid action and its ViewModel branch, and trims
the OtherCard height by one row.
- Grid mode now opens with the VUCC award chip selected by default (re-asserted
on every grid-mode entry; the user's in-mode chip choice is preserved).
- The station's own grid outline is now drawn at every zoom level: 2-char field
border below the sub-square zoom, 4-char square border above it (was hidden
at the default entry zoom), stroke widened to 6f.
- Grids the account operated from (LoTW <MY_GRIDSQUARE>, satellite QSOs only)
are covered with GridMaster-style blue 45° zebra stripes. The stripe paint is
fully opaque so a worked+roamed cell shows pure-blue stripes with green
between them — the two colors never alpha-blend into a teal/green mix.
- LoTW sync now parses and persists the roamed set (LoTWResult.Success +
SettingsRepo key 'roamedGrids'), plumbed through MapState/MapViewModel into
MaidenheadGridOverlay. Unit tests cover MY_GRIDSQUARE parsing (SAT-only,
GRIDSQUARE non-leak, 4-char truncation).
- wapc/dxcc assets: add Hong Kong & Macau labels (forceLabel) and MO boundary in dxcc
- AwardBoundaryOverlay: rings split at antimeridian no longer close() per segment — removes spurious Russia cross-continent chord
- AwardCalculator: Macau DXCC entity 330 -> 152 (+test)
- Settings LoTW dialog: add sync duration hint (zh/en)
Rate limit classification per ARRL policy (one download in progress per user
id; HTTP 503 'Page request limit' observed on throttled pulls) and the HTML
login-error page returned for wrong credentials. Settings screen now shows a
specific message per cause instead of one generic 'check callsign/password/network'.
- LoTW sync now stores per-QSO detail (call/time/sat/mode/bands) grouped by
gridsquare (PROP_MODE=SAT only), single JSON blob in SharedPreferences
- GridQso model derives band label (V/U, U/V, V/A...) from BAND_RX/BAND
- Tap detection via osmdroid MapEventsOverlay; selected grid outlined green
- Centered dialog: calls sorted by first-contact time, first-QSO summary,
expandable call rows list subsequent QSOs in that grid; tap outside closes
Add a full-screen update checker accessible from a button at the
bottom of the settings page. It queries the fork's GitHub latest
release and can download + install the APK in place.
- UpdateRepository (core/data): fetch releases/latest via GitHub API,
parse tag/description/APK asset, stream APK download to cacheDir
- VersionComparator (core/domain): compare 4.4.6-ba7opf.N style tags
(base version first, then build number; v-prefix tolerant) + tests
- IMainContainer/MainContainer: inject updateRepo
- UpdateCheckerScreen (feature/settings): shows current version,
checks for updates, displays latest version + release notes, and a
Download & install button; FileProvider hands the APK to the
system installer
- SettingsScreen: bottom entry button, full-screen page toggle
- AndroidManifest: REQUEST_INSTALL_PACKAGES permission + FileProvider
- i18n strings (en/zh)
Port the upstream drag-reorder pattern (dragHandle/draggedVisual/
autoScroll/DragRowState) so custom data source rows can be reordered
by long-pressing the handle icon, replacing the old move-up button.
- Add 40dp drag-handle box at row start with long-press gesture
- Live reorder while dragging (neighbour squeeze + spring settle)
- Edge auto-scroll during drag
- Keep per-source enabled checkbox + HTTP status label
This file also carries the #242 data-source dialog UI (enabled
checkbox, status code label, restore-default button) which shares
the same sourceSection function and cannot be cleanly split.
When adjusting RX in passband mode (via +/- buttons or slider), the old
code used TransponderMapper.mapDownlinkToUplink (pure passband mapping
without Doppler compensation), producing ~10kHz error at LEO velocities.
Fix: use DopplerFrequencyCalculator.computeUplinkFromDownlinkWithOffset
for the full TX-from-RX round-trip, matching the RX→PASSBAND button
onClick logic. Also fixed frame mismatch: position now uses txLow/txRange
(Doppler-shifted frame) consistently.
- Added support for Icom IC-705 radio model with split mode functionality.
- Updated RadioTrackingService to handle single-radio split mode and dual-radio configurations.
- Modified MainContainer to provide appropriate radio controllers based on selected model.
- Enhanced SettingsRepo to include split mode preference in radio control settings.
- Updated UI in SettingsDialog to allow toggling of split mode for IC-705 and adjust device selection accordingly.
- Improved handling of baud rates based on selected radio model.
- Added extended operations in IRadioController for IC-705 specific commands.
atsunatsu