When adjusting RX in passband mode (via +/- buttons or slider), the old
code used TransponderMapper.mapDownlinkToUplink (pure passband mapping
without Doppler compensation), producing ~10kHz error at LEO velocities.
Fix: use DopplerFrequencyCalculator.computeUplinkFromDownlinkWithOffset
for the full TX-from-RX round-trip, matching the RX→PASSBAND button
onClick logic. Also fixed frame mismatch: position now uses txLow/txRange
(Doppler-shifted frame) consistently.
Store the offset (kHz) per NORAD catalog id in SharedPreferences so
each satellite's last entered offset is restored when reopening the
frequency calculator.
- Adjust ic_satellite_alt translateY from -226.13 to -230.5 so icon
is centered vertically (not clipped at bottom)
- Replace ic_match with ic_radio_tower (MDI) for Mutual page
Port upstream PR #234 to fork main:
- New feature:status module (SatStatusScreen, SatStatusViewModel)
- New AmSatRepository + IAmSatRepository + SatStatus models
- RemoteSource: AMSAT API methods (getAmSatCatalog, getAmSatReports)
- MainContainer/IMainContainer: DI injection
- MainTheme: AMSAT status colors (tertiary slots)
- Chinese translations added for all AMSAT strings
- 26 unit tests passing
Note: navigation entry not included — upstream PR #234 intentionally
left it out pending UI restructuring. Add AMSAT to your nav bar or
menu as desired.
Use combine(selectedIds, stationPosition) in SatelliteRepo.initRepository
so that passes are recalculated on either satellite selection change or
station position change. StateFlow already emits distinct values.
- isNamedLinearTransponder: match ' Lin' prefix (AO-7 style) and
add fallback branch (hasLinearName && hasLinearMode) for entries
with 'Linear'/'Lin' but no 'transponder' word (AO-7, AO-73)
- add deduplicateTransponders: merge entries sharing the same
uplink/downlink frequency range, preferring non-CW entry
(AO-7 Mode A had separate SSB and CW entries; JO-97 had
separate CW and SSB Transponder entries)
- apply dedup in CalculatorPage filter chain
- 6 new tests, 23 total, all passing
Match page UI:
- Always show a meaningful status line in the top bar instead of leaving the second row blank on first entry.
- Add a compact status chip for waiting, calculating, result, no-match, and error states.
- Remove the duplicate intro card so the first screen starts directly with station inputs.
Pass list sun times:
- Compute sunrise/sunset from each visible date group's 00:00 in the selected timezone.
- Avoid using an arbitrary pass AOS as the rise/set search start, which could jump later-day headers to the following day's events.
- Radar pager now defaults to Transceivers tab (initialPage=0)
- Transceivers don't auto-expand (selectedUuid defaults to null)
- Mutual page default minElev changed from settings value to 0.0
- Display filters out portions below the minElev threshold
Elevation curve chart and mutual radar plot now only show the portion
where both stations are above their respective minimum elevation.
The curves are filtered at display time, the pass search still uses
the 0° horizon boundary for consistency with the Passes page.
Removed the automatic posA=stationPos override. Added a button
'当前精确位置' below the grid input that fills in the exact station
position from settings (lat/lon + grid). Users can now freely edit
the position fields and use the button when they want the exact
position.
Root cause: gridToLatLon used (lon+180)%360-180 and (lat+90)%180-90
for normalization, treating grid values as from prime meridian/equator
when they are actually from IDL/South Pole. A 6-char grid like OL62AA
(112°E, 22°N) was returning -67.96°, -67.98° (Atlantic Ocean).
Also added bidirectional sync: entering a grid auto-fills lat/lon,
entering lat/lon auto-fills the 6-char grid, so users can verify.
getFullPosition and getElevation both call calculateObs internally,
but the elevation values reported by the user (-60°) suggest they may
differ. Now elevation is computed via getElevation (same as getLeoPass),
while getFullPosition is only used for azimuth.
The passes list AOS/LOS times can be stale or computed for a different
station position, causing elevation curves to show -60° at pass start.
The independent search (refineEdge + sampleMutualPass) always computes
elevation for the actual positions. With posA now set to the exact
station position, the pass times should match the main page.
The refineEdge function re-computed boundaries using the grid-center
position (posA), which differs from the exact station position that
the passes list was computed with. This caused all passes to be
filtered out. Now we trust the pass list's AOS/LOS times directly
and just sample the elevation/azimuth curves.
If the main pass list (satelliteRepo.passes) is empty or the common
window check filters everything out, fall back to the independent
search algorithm so the user always gets results.
findMutualPasses was computing passes independently with its own
search algorithm, which produced different results from the main
page's getLeoPass. Now it directly reuses satelliteRepo.passes,
which is the same list shown on the main passes page. The only
additional computation is refining the common window for station B
and sampling elevation/azimuth curves.
Root cause: mutual search used the min-elevation threshold (default 10°)
as the AOS/LOS boundary, while the main radar uses the 0° horizon
(getLeoPass). With identical stations the windows therefore never
matched. Also, an in-progress pass was counted as a new one.
- AOS/LOS boundaries now at the 0° horizon (refined to 1s)
- Skip in-progress mutual windows at search start (like getLeoPass)
- Filter requires BOTH stations to reach their min elevation
- Default min elevation follows the main radar passes setting
- Elevation ring labels were inverted (90/60/30 from outer to inner);
now 30/60/90 correctly from outer ring to center
- Split track paths at the 0/360° azimuth wrap in both MutualRadarView
and main RadarView, so passes crossing due north no longer draw a
line straight across the plot
Track line is no longer time-limited (always shows the whole mutual
arc). The station-B live position is drawn separately on the line
using the same pulsing-dot mode as the local station.
- ElevationCurveChart is now controlled (progress + onProgressChange)
- MutualRadarView shows shared time-cursor positions for both stations
and is draggable/tappable to move the cursor
- MutualPassCard owns a single dragProgress feeding both charts, so
dragging either chart moves the other in sync
- MutualViewModel is Activity-scoped, so returning from Radar keeps query results
- TrackSampleData gains time field for live cut-off
- Removed standalone mutual card from radar page
- RadarViewCompose draws optional dashed station-B track + current dot
- RadarScreen builds trackB from mutual data up to current time
atsunatsu
mckero