Root cause: gridToLatLon used (lon+180)%360-180 and (lat+90)%180-90
for normalization, treating grid values as from prime meridian/equator
when they are actually from IDL/South Pole. A 6-char grid like OL62AA
(112°E, 22°N) was returning -67.96°, -67.98° (Atlantic Ocean).
Also added bidirectional sync: entering a grid auto-fills lat/lon,
entering lat/lon auto-fills the 6-char grid, so users can verify.
getFullPosition and getElevation both call calculateObs internally,
but the elevation values reported by the user (-60°) suggest they may
differ. Now elevation is computed via getElevation (same as getLeoPass),
while getFullPosition is only used for azimuth.
The passes list AOS/LOS times can be stale or computed for a different
station position, causing elevation curves to show -60° at pass start.
The independent search (refineEdge + sampleMutualPass) always computes
elevation for the actual positions. With posA now set to the exact
station position, the pass times should match the main page.
The refineEdge function re-computed boundaries using the grid-center
position (posA), which differs from the exact station position that
the passes list was computed with. This caused all passes to be
filtered out. Now we trust the pass list's AOS/LOS times directly
and just sample the elevation/azimuth curves.
If the main pass list (satelliteRepo.passes) is empty or the common
window check filters everything out, fall back to the independent
search algorithm so the user always gets results.
findMutualPasses was computing passes independently with its own
search algorithm, which produced different results from the main
page's getLeoPass. Now it directly reuses satelliteRepo.passes,
which is the same list shown on the main passes page. The only
additional computation is refining the common window for station B
and sampling elevation/azimuth curves.
Root cause: mutual search used the min-elevation threshold (default 10°)
as the AOS/LOS boundary, while the main radar uses the 0° horizon
(getLeoPass). With identical stations the windows therefore never
matched. Also, an in-progress pass was counted as a new one.
- AOS/LOS boundaries now at the 0° horizon (refined to 1s)
- Skip in-progress mutual windows at search start (like getLeoPass)
- Filter requires BOTH stations to reach their min elevation
- Default min elevation follows the main radar passes setting
- Elevation ring labels were inverted (90/60/30 from outer to inner);
now 30/60/90 correctly from outer ring to center
- Split track paths at the 0/360° azimuth wrap in both MutualRadarView
and main RadarView, so passes crossing due north no longer draw a
line straight across the plot
Track line is no longer time-limited (always shows the whole mutual
arc). The station-B live position is drawn separately on the line
using the same pulsing-dot mode as the local station.
- ElevationCurveChart is now controlled (progress + onProgressChange)
- MutualRadarView shows shared time-cursor positions for both stations
and is draggable/tappable to move the cursor
- MutualPassCard owns a single dragProgress feeding both charts, so
dragging either chart moves the other in sync
- MutualViewModel is Activity-scoped, so returning from Radar keeps query results
- TrackSampleData gains time field for live cut-off
- Removed standalone mutual card from radar page
- RadarViewCompose draws optional dashed station-B track + current dot
- RadarScreen builds trackB from mutual data up to current time
- MutualPass now carries TrackSample (azimuth/elevation for both stations)
- New MutualRadarView: polar plot with elevation rings (30/60/90),
cardinal spokes, solid A-track vs dashed B-track, AOS/LOS markers
- Shown in expanded mutual pass card and radar page mutual card
Absolute epoch millis (~1.7e12) exceeds Float precision (ULP ~131s
at that magnitude), so 5s-spaced samples collapsed onto identical
x coordinates, producing a stepped/jagged curve. Use Long relative
time deltas (sample - start) before converting to Float.
- Fix cubic Bezier control points (proper Catmull-Rom to Bezier conversion)
- Refine AOS/LOS more robustly by walking from edge into the pass window
- Still 5s sampling for smooth curves
- Reduce sample interval from 10s to 5s for smoother curves
- Add refineEdge() to find exact AOS/LOS at 1s resolution
- Curve now starts/ends at the correct horizon-crossing points
- Pre-fill station A grid from settingsRepo.stationPosition
- Find ALL mutual passes per satellite (not just first)
- Fix Color.hashCode() -> Color.toArgb() for native canvas paint
- Use 2min gap between pass searches to avoid duplicates
Bug: OrbitalObject.getElevation() returns radians, but
MutualViewModel was comparing it directly with degree values
from the slider (10-90), causing no matches to be found.
Fix: add elevationDeg() helper that converts to degrees.
Also add Maidenhead grid square input support (4/6/8 chars)
alongside existing lat/lon fields. Grid takes priority when
filled.
Port satlover.de dual-station pass matching feature:
- New feature/mutual module with mutual pass data model
- MutualViewModel: compute overlapping passes for two stations
- ElevationCurveChart: Canvas-based dual elevation curve with drag
- MutualScreen: input form + results with expandable cards
- Navigation: add Mutual tab to bottom navigation bar
- i18n: add Chinese/English strings for new feature
Extract dateFormat() helper to ensure computeSunTimes and
groupPasses use identical date format, fixing sunrise/sunset
display bug.
For Chinese locale: "2026年8月1日 星期六"
For English locale: "Sat, 01 Aug 2026"
DateFormat.FULL may cause inconsistent date labels between
computeSunTimes and groupPasses, leading to missing or
wrong sunrise/sunset times. Revert to the original pattern
"EEE, dd MMM yyyy" but with Locale.getDefault() so day
names follow the system language.
Keep number removed from pass list (Components.kt) and
pass detail (PassesScreen.kt) as requested, but restore
it in the satellite selection list (SatellitesScreen.kt).
Use MaterialTheme.colorScheme.primary for satellite name
text in all three lists (Components, SatellitesScreen,
PassesScreen), matching the color that was previously
used for the catalog number.
Remove the NORAD catalog number (e.g. '44444 - ') prefix
from satellite names in three places:
- Pass list items (Components.kt)
- Satellite selection list (SatellitesScreen.kt)
- Pass detail view (PassesScreen.kt)
The number is still accessible via satellite details if needed.
Replace SimpleDateFormat("EEE, dd MMM yyyy") with
DateFormat.getDateInstance(DateFormat.FULL, locale) which
automatically uses the correct format for each locale:
- Chinese: "2026年8月1日 星期六"
- English: "Saturday, August 1, 2026"
- Other locales: their respective conventions
PassesViewModel and PassesScreen used Locale.ENGLISH for
SimpleDateFormat, causing day-of-week names like 'Sun' to
always show in English. Changed to Locale.getDefault() so
the device's language setting is respected.
Affects: 'EEE, dd MMM yyyy' date labels in the pass list
(group headers and sun times), and 'HH:mm:ss' time format.
- Add CwDsp with FIR bandpass filter, envelope detection, Goertzel tone detector
- Add CwDecoder with real-time Morse timing analysis and character lookup
- Add CW state/actions to RadarState, wire into RadarViewModel
- Add collapsible CW decoder panel to transceivers page
- 19 unit tests covering DSP, Morse table, and decoder state
- Shares IAudioCapture with SSTV, auto-stops SSTV when CW starts
- Add DopplerFrequencyCalculator utility with passband mapping + Doppler correction
- Add MHz input UI with real-time 1Hz refresh during pass
- Add kHz offset for downlink frequency correction
- TX/RX fields on same row for compact layout
- 40 unit tests covering linear/FM/inverted transponders
- Added support for Icom IC-705 radio model with split mode functionality.
- Updated RadioTrackingService to handle single-radio split mode and dual-radio configurations.
- Modified MainContainer to provide appropriate radio controllers based on selected model.
- Enhanced SettingsRepo to include split mode preference in radio control settings.
- Updated UI in SettingsDialog to allow toggling of split mode for IC-705 and adjust device selection accordingly.
- Improved handling of baud rates based on selected radio model.
- Added extended operations in IRadioController for IC-705 specific commands.
atsunatsu