P2 — markUploaded now only marks the records that actually made it
into the accepted TQ8 batch (preview.submittedIds), never the whole
candidate list. Previously, un-signable records skipped by prepare()
were still marked UP after any accepted upload, falsely showing them
as uploaded.
P4 — surface why records did not upload:
- When audit finds nothing pending, distinguish unavailable records
(invalid call/date — check logbook) from unknown-result records
(not retried automatically) instead of a blanket 'no pending'.
- Upload preview dialogs (Log tab + logbook) show a breakdown line:
N already uploaded/duplicate · N unknown result · N un-uploadable.
The LoTW upload card read uiState.lotwCertificate which was only
populated when the config dialog was opened (LoadLoTWUploadStatus).
On first entry to the settings screen it stayed null, showing
'certificate not imported' even though a certificate was stored.
Load certificate + station once in init so the card is correct
from the first frame.
The import previously swallowed all exceptions silently. Now the upload
config dialog shows a specific message for: wrong password, expired
certificate, invalid file, and unknown failures.
- displayMode no longer trusts a stale submode for non-MFSK modes: FM/CW/SSB
records (including ones persisted with the old default submode=FT4) now show
their real mode; only MODE=MFSK uses the FT4 submode. QsoRecord defaults
changed mode=MFSK->FM, submode=FT4->''.
- LoTW report bridge sets submode=FT4 for MODE=MFSK so confirmations still
match local FT4 records.
- Logbook and LoTW upload config dialogs now use SharedDialog (bottom-sheet),
matching the LoTW confirmed-grids dialog style.
The Choose .p12 button was gated on a non-blank password, which forced users
to type the password before selecting the file. Now the file picker is always
available; after selection the filename is shown, then the password field and
an Import button appear.
- Port TQ8 signing/upload pipeline (core/data/lotw: LoTWConfig, LoTWKeyMaterial,
LoTWSigner, LoTWStorage, LoTWUploadRepository) with bundled ARRL config.tq6
- Multi-grid station locations: primary grid in GRIDSQUARE + full set in
MY_VUCC_GRIDS (unsigned tSTATION extra, IOTA precedent); signer matches
myGrid against the whole grid set
- Satellite-name normalization: SatNOGS names ("SO-50 (SaudiOSCAR 50)") resolve
to official LoTW names by exact-then-substring match
- Logbook storage: separate QsoDatabase (version 1, no migration on existing
installs), QsoRepository with dedupe/confirmation merge; LoTW sync (manual +
auto) feeds confirmations into the logbook and marks local uploads confirmed
- Radar Log tab: single-callsign recording, per-satellite mode preset
(CW/SSB/FT4), English social post generation (copy/share), LoTW upload with
one-shot preview confirmation + receipts ledger
- Settings: 日志本 section (records + confirmation state, delete on tap) above
LoTW config; LoTW upload config (TrustedQSL .p12 import + password, station
grid list incl. IOTA/CQZ/ITUZ)
- i18n strings (en/zh)
- Pass history (Iu-yang1 fork): PassesSettings.hoursBefore look-back window;
second 'Time before' slider in the pass filter; completed passes stay
listed (progress clamped to [0,1]) in the history window.
- Compass calibration (Iu-yang1 fork): OtherSettings.compassOffsetDegrees,
CompassAccuracy from the magnetic sensor, calibration dialog with
figure-eight accuracy meter, corrected heading and manual offset field;
RadarViewModel applies the offset.
- What's New dialog now shows the cumulative 4.4.6->4.4.7 changelog and
follows the system language (values/ + values-zh/).
- pass_filter_history_hours localized in es/ru/si/tr/uk.
The stored sync cursor was 'yyyyMMdd', which LoTW's qso_qslsince silently
ignores (measured live: it falls back to the system-supplied default).
Write a full UTC 'yyyy-MM-dd HH:mm:ss' cursor instead — the documented
format LoTW honors — so incremental pulls are exact (second precision)
and the settings page can show the last successful sync time on the LoTW
card, formatted like the ephemeris update time (prefs_updated_title).
Legacy yyyyMMdd cursors are normalized for the API, the gate and the
display (lotwCursorApi/lotwCursorDate/lotwCursorEpochMs).
Mirrors the ephemeris auto-update check: on every app start, if LoTW
credentials are configured, the new 'auto-sync LoTW grids' toggle is on,
at least one manual sync was done before, and today has not synced yet
(ARRL rate limit, ~once a day), pull confirmations since the last sync
and merge them. Same callsign -> incremental merge; callsign change ->
full replace. Manual dialog and automatic path share the orchestration
(mode resolution, gate, merge/persist) moved to core:domain
LoTWGridSync.kt; LoTWSyncMode moved to core:domain. 8 unit tests.
- Cancel: the dialog's cancel/back while syncing now aborts the download job
(cooperative cancellation in the stream reader, CancellationException
propagated, nothing written to storage). An accidental full sync can be
stopped immediately.
- Progress: the size estimate is conservative (900 B/record vs measured 720)
so the bar never hits 100% before the download truly ends; storage writes
moved to the IO dispatcher (multi-MB per-grid QSO JSON used to freeze the
main thread after download); when the bar caps, the UI switches to
'Processing downloaded data…' instead of looking stuck.
- Removed the outdated '3-10 seconds' hint (misleading for large accounts).
- SharedDialog title gets start padding when only a cancel button is shown
(was flush against it); dialogs with both buttons unchanged.
- LoTW dialog: full-sync button bottom-left, incremental-merge bottom-right
(SpaceBetween instead of side-by-side).
Two explicit sync buttons in the LoTW dialog:
- Full sync: qso_qslsince=2000-01-01, fresh report replaces all stored data.
- Incremental merge: since=last successful sync date, merged into the stored
set (grids union, QSOs deduped by call + time). First sync / callsign change
automatically falls back to full replace so no stale grids from another
account linger.
Progress & estimates:
- Report body is now streamed; the header's <APP_LoTW_NUMREC> gives the real
QSL count, total size is estimated as NUMREC * 720 B (measured), and the UI
shows a determinate bar with 'N QSOs, ~X s remaining' once known.
- Pre-sync hint shows the measured rate (~8 s per 100 QSOs).
- readTimeout raised to 600 s (stall timeout, not a total cap — huge accounts
legitimately take 30+ min at ARRL's ~10 KB/s stream rate); connectTimeout
raised to 60 s (a busy server took 36.5 s to accept a connection).
Also: ISettingsRepo gains last-sync date/callsign bookkeeping, and the mutual
test fake implements the new members.
Grid mode is toggled from the map page pill (MapAction.ToggleGridMode writes
stateOfMapGrid); the settings-page switch was a duplicate entry point. Removes
the SwitchRow, the ToggleMapGrid action and its ViewModel branch, and trims
the OtherCard height by one row.
- Grid mode now opens with the VUCC award chip selected by default (re-asserted
on every grid-mode entry; the user's in-mode chip choice is preserved).
- The station's own grid outline is now drawn at every zoom level: 2-char field
border below the sub-square zoom, 4-char square border above it (was hidden
at the default entry zoom), stroke widened to 6f.
- Grids the account operated from (LoTW <MY_GRIDSQUARE>, satellite QSOs only)
are covered with GridMaster-style blue 45° zebra stripes. The stripe paint is
fully opaque so a worked+roamed cell shows pure-blue stripes with green
between them — the two colors never alpha-blend into a teal/green mix.
- LoTW sync now parses and persists the roamed set (LoTWResult.Success +
SettingsRepo key 'roamedGrids'), plumbed through MapState/MapViewModel into
MaidenheadGridOverlay. Unit tests cover MY_GRIDSQUARE parsing (SAT-only,
GRIDSQUARE non-leak, 4-char truncation).
- wapc/dxcc assets: add Hong Kong & Macau labels (forceLabel) and MO boundary in dxcc
- AwardBoundaryOverlay: rings split at antimeridian no longer close() per segment — removes spurious Russia cross-continent chord
- AwardCalculator: Macau DXCC entity 330 -> 152 (+test)
- Settings LoTW dialog: add sync duration hint (zh/en)
Rate limit classification per ARRL policy (one download in progress per user
id; HTTP 503 'Page request limit' observed on throttled pulls) and the HTML
login-error page returned for wrong credentials. Settings screen now shows a
specific message per cause instead of one generic 'check callsign/password/network'.
- LoTW sync now stores per-QSO detail (call/time/sat/mode/bands) grouped by
gridsquare (PROP_MODE=SAT only), single JSON blob in SharedPreferences
- GridQso model derives band label (V/U, U/V, V/A...) from BAND_RX/BAND
- Tap detection via osmdroid MapEventsOverlay; selected grid outlined green
- Centered dialog: calls sorted by first-contact time, first-QSO summary,
expandable call rows list subsequent QSOs in that grid; tap outside closes
Add a full-screen update checker accessible from a button at the
bottom of the settings page. It queries the fork's GitHub latest
release and can download + install the APK in place.
- UpdateRepository (core/data): fetch releases/latest via GitHub API,
parse tag/description/APK asset, stream APK download to cacheDir
- VersionComparator (core/domain): compare 4.4.6-ba7opf.N style tags
(base version first, then build number; v-prefix tolerant) + tests
- IMainContainer/MainContainer: inject updateRepo
- UpdateCheckerScreen (feature/settings): shows current version,
checks for updates, displays latest version + release notes, and a
Download & install button; FileProvider hands the APK to the
system installer
- SettingsScreen: bottom entry button, full-screen page toggle
- AndroidManifest: REQUEST_INSTALL_PACKAGES permission + FileProvider
- i18n strings (en/zh)
Port the upstream drag-reorder pattern (dragHandle/draggedVisual/
autoScroll/DragRowState) so custom data source rows can be reordered
by long-pressing the handle icon, replacing the old move-up button.
- Add 40dp drag-handle box at row start with long-press gesture
- Live reorder while dragging (neighbour squeeze + spring settle)
- Edge auto-scroll during drag
- Keep per-source enabled checkbox + HTTP status label
This file also carries the #242 data-source dialog UI (enabled
checkbox, status code label, restore-default button) which shares
the same sourceSection function and cannot be cleanly split.
When adjusting RX in passband mode (via +/- buttons or slider), the old
code used TransponderMapper.mapDownlinkToUplink (pure passband mapping
without Doppler compensation), producing ~10kHz error at LEO velocities.
Fix: use DopplerFrequencyCalculator.computeUplinkFromDownlinkWithOffset
for the full TX-from-RX round-trip, matching the RX→PASSBAND button
onClick logic. Also fixed frame mismatch: position now uses txLow/txRange
(Doppler-shifted frame) consistently.
- Added support for Icom IC-705 radio model with split mode functionality.
- Updated RadioTrackingService to handle single-radio split mode and dual-radio configurations.
- Modified MainContainer to provide appropriate radio controllers based on selected model.
- Enhanced SettingsRepo to include split mode preference in radio control settings.
- Updated UI in SettingsDialog to allow toggling of split mode for IC-705 and adjust device selection accordingly.
- Improved handling of baud rates based on selected radio model.
- Added extended operations in IRadioController for IC-705 specific commands.
atsunatsu